Amiga.org

Amiga News and Community Announcements => Amiga News and Community Announcements => Topic started by: Pyromania on October 03, 2013, 11:32:39 AM

Title: MorphOS: Promise SATA II 150/300-series PCI adapters
Post by: Pyromania on October 03, 2013, 11:32:39 AM

News from ASiegel via MorphZone

Rupert "naTmeg" Hausberger has published drivers for Promise SATA II 150/300-series PCI-adapters. The minimum requirements are MorphOS 1.x or higher so users running old MorphOS set ups can utilitze them as well.

Features:
Up to 2 adapters
ATA/ATAPI support
UDMA/PIO support
ATA SCSI-emulation
ATAPI disk-change handler
EXEC/TD/TD64/SCSI commands
64-bit support (drives > 2TB)
S.M.A.R.T. support
Support for query.library (HDConfig/Mounter)

You can download the drivers and sources on the following page: http://www.219.dic.at

Title: Re: MorphOS: Promise SATA II 150/300-series PCI adapters
Post by: LoadWB on October 03, 2013, 05:25:17 PM

Holy crap... I have several of these lying around...

Title: Re: MorphOS: Promise SATA II 150/300-series PCI adapters
Post by: Iggy on October 03, 2013, 06:00:26 PM

Great news.
It a shame no one has created a driver for the Sonnet PCI-X controller I have (SATAII but Marvell based).