Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: punkpie on February 04, 2004, 10:02:22 AM

Title: Mediator problems :(
Post by: punkpie on February 04, 2004, 10:02:22 AM
Hi all,

I'm having a few problems with the meditor a1200 pci.  I plugged my a1200 into my tv to test for display.  This worked fine... I think plugged in the mediator, following instructions in the manual, but after turning the a1200 back on all I get is either a black or green screen on my tv.

I have a Virge video card plugged into slot 1 (with a svga monitor plugged into that) so I can configure it through my tv.  I've tried removing the card and changing slots to no available.

Anyone got any ideas?
Title: Re: Mediator problems :(
Post by: ID4 on February 04, 2004, 12:52:10 PM
Have you tried to switch the Envarc Vblank Interrupts? Humm Have you installed P96?

We need more info to help you.
Title: Re: Mediator problems :(
Post by: punkpie on February 04, 2004, 02:13:57 PM
Hi,

Thanks for the reply.  I'll elaborate.

The problem is that I cant even get into workbench because the green/black screen appears, immediatly after turning on the a1200, when the mediator is plugged in.

The problem must be some sort of connection somewhere but I'm not sure what to start with.

Thanks,

Lee
Title: Re: Mediator problems :(
Post by: JaXanim on February 04, 2004, 05:37:36 PM
I strongly recommend anyone with a Mediator system to join the Mediator Group (http://groups.yahoo.com/group/Amiga-Mediator) on Yahoo, where you'll have access to expert advice from Elbox, etc.

Cheers,

Jax
Title: Re: Mediator problems :(
Post by: Madgun68 on February 04, 2004, 06:40:04 PM
Quote
The problem must be some sort of connection somewhere but I'm not sure what to start with.
There are jumpers on the mediator. One of them you change for certain accelerators. Have you checked that?