Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: trixeo on May 18, 2013, 10:02:13 PM

Title: Amiga 500 and Amiga 3000 capacitor replacement list
Post by: trixeo on May 18, 2013, 10:02:13 PM

Amiga 500 and Amiga 3000 capacitor replacement list

Hi, I've compiled a list of the capacitors that can be and sometimes should be replaced in both Amiga 500 and Amiga 3000, for my own needs, I'm sharing it here hoping that someone else might find it useful. All information is taken from the Service Manuals of the A500/A3000 respectively. All caps but only a few are "ELEC RAD" (Polarized Radial Aluminum Electrolytic Capacitors). The "ELEC AXL" (Polarized Axial Aluminum Electrolytic Capacitors) are on the A3000 daughterboard. All measurements are ca. in millimetres.

Amiga 500: "Amiga 500 (P) Rev. 6A (WW /89/90)":
-------------------------------------------------------------------------------
PCB#..Cap.....Volt...HxøD.....Orinal caps...........C= Ass. #..Type......Notes
-------------------------------------------------------------------------------
C821..47µF....16VDC..11x5mm...SHOEI M85°C 948.......390101-01..ELEC RAD
C822..47µF....16VDC..11x5mm...SHOEI M85°C 948.......390101-01..ELEC RAD
C812..100µF...16VDC..11x5mm...ELNA RE2 CE85°C 8905..390101-02..ELEC RAD
C811..100µF...16VDC..11x6mm...SHOEI M85°C 918.......390101-02..ELEC RAD
C813..100µF...16VDC..11x6mm...SHOEI M85°C 918.......390101-02..ELEC RAD
C814..100µF...16VDC..11x6mm...SHOEI M85°C 918.......390101-02..ELEC RAD
C815..100µF...16VDC..11x6mm...SHOEI M85°C 918.......390101-02..ELEC RAD
C816..100µF...16VDC..11x6mm...SHOEI M85°C 918.......390101-02..ELEC RAD
C307..470µF...16VDC..12x10mm..SHOEI M85°C 948.......390101-03..ELEC RAD
C303..22µF....35VDC..11x5mm...ELNA RE2 CE85°C 8914..390101-04..ELEC RAD
C304..22µF....35VDC..11x5mm...ELNA RE2 CE85°C 8914..390101-04..ELEC RAD
C324..22µF....35VDC..11x5mm...SHOEI M85°C 918.......390101-04..ELEC RAD..(a)
C334..22µF....35VDC..11x5mm...SHOEI M85°C 918.......390101-04..ELEC RAD..(a)
C306..10µF....35VDC..11x5mm...NICHICON 85°C M8813...390101-06..ELEC RAD
C712..10µF....35VDC..11x5mm...NICHICON 85°C M8813...390101-06..ELEC RAD
C401..3300µF..10VDC..24x13mm..SHOEI M85°C 8d8.......900100-56..ELEC RAD
C402..3300µF..10VDC..24x13mm..SHOEI M85°C 8d8.......900100-56..ELEC RAD
-------------------------------------------------------------------------------
(a) Some say these ones should be changed to a Bi-Polar Capacitor but the original is not.

I've successfully substituded these in my A500 with the following caps from Panasonic:
-----------------------------------------------------
QTY..Cap.....Volt...HxøD.....Model
-----------------------------------------------------
2....10µF....50VDC..11x5mm...PANASONIC ECA1HM100
4....22µF....50VDC..11x5mm...PANASONIC ECA1HM220
2....47µF....50VDC..11x6mm...PANASONIC ECA1HM470
6....100µF...50VDC..11x8mm...PANASONIC EEUFR1H101
1....470µF...25VDC..12x10mm..PANASONIC EEUFR1E471
2....3300µF..25VDC..25x16mm..PANASONIC EEUFR1E332
-----------------------------------------------------
Voltages are not the same as the originals, which I've done by purpose. They are more reliable but a little more expensive.

Amiga 3000 Motherboard: "A3000 COMMODORE B2 FAB 313312 REV 9/03 P/N 313313 REV 9/03 TF/HD/DH/GB/SH/JB/MN":
------------------------------------------------------------------------------------------
PCB#..Cap....Volt...HxøD.....Orinal caps................C= Ass. #..Type......Notes
------------------------------------------------------------------------------------------
C112..47µF...16VDC..11x5mm...NICHICON VX(M) 85°C X9143..390101-01..ELEC RAD
C162..47µF...16VDC..11x5mm...NICHICON VX(M) 85°C X9143..390101-01..ELEC RAD
C164..47µF...16VDC..11x5mm...NICHICON VX(M) 85°C X9143..390101-01..ELEC RAD
C165..47µF...16VDC..11x5mm...NICHICON VX(M) 85°C X9143..390101-01..ELEC RAD
C168..47µF...16VDC..11x5mm...NICHICON VX(M) 85°C X9143..390101-01..ELEC RAD
C169..47µF...16VDC..11x5mm...NICHICON VX(M) 85°C X9143..390101-01..ELEC RAD
C173..47µF...16VDC..11x5mm...NICHICON VX(M) 85°C X9143..390101-01..ELEC RAD
C175..47µF...16VDC..11x5mm...NICHICON VX(M) 85°C X9143..390101-01..ELEC RAD
C407..47µF...16VDC..11x5mm...NICHICON VX(M) 85°C X9143..390101-01..ELEC RAD..(c)
C408..47µF...16VDC..11x5mm...NICHICON VX(M) 85°C X9143..390101-01..ELEC RAD
C899..47µF...16VDC..11x5mm...NICHICON VX(M) 85°C X9143..390101-01..ELEC RAD
C163..47µF...16VDC..11x5mm...SHOEI M85°C 198............390101-01..ELEC RAD
C166..47µF...16VDC..11x5mm...SHOEI M85°C 198............390101-01..ELEC RAD
C167..47µF...16VDC..11x5mm...SHOEI M85°C 198............390101-01..ELEC RAD
C171..47µF...16VDC..11x5mm...SHOEI M85°C 198............390101-01..ELEC RAD
C178..100µF..16VDC..11x6mm...SHOEI M85°C 181............390101-02..ELEC RAD..(b)
C416..470µF..16VDC..12x10mm..ELNA RE2 CE85°C 9127.......390101-03..ELEC RAD..(c)
C160..470µF..16VDC..12x10mm...SHOEI M85°C 178...........390101-03..ELEC RAD
C423..470µF..16VDC..12x10mm...SHOEI M85°C 178...........390101-03..ELEC RAD
C454..470µF..16VDC..12x10mm...SHOEI M85°C 178...........390101-03..ELEC RAD
C460..470µF..16VDC..12x10mm...SHOEI M85°C 178...........390101-03..ELEC RAD
C492..470µF..16VDC..12x10mm...SHOEI M85°C 178...........390101-03..ELEC RAD
C493..470µF..16VDC..12x10mm...SHOEI M85°C 178...........390101-03..ELEC RAD
C105..22µF...35VDC..11x5mm....ELNA RE2 CE85°C 9135......390101-04..ELEC RAD
C107..22µF...35VDC..11x5mm....ELNA RE2 CE85°C 9135......390101-04..ELEC RAD
C113..22µF...35VDC..11x5mm....ELNA RE2 CE85°C 9135......390101-04..ELEC RAD
C317..22µF...35VDC..11x5mm....ELNA RE2 CE85°C 9135......390101-04..ELEC RAD
C318..22µF...35VDC..11x5mm....ELNA RE2 CE85°C 9135......390101-04..ELEC RAD
C433..22µF...35VDC..11x5mm....ELNA RE2 CE85°C 9135......390101-04..ELEC RAD
C443..22µF...35VDC..11x5mm....ELNA RE2 CE85°C 9135......390101-04..ELEC RAD
C190..4.7µF..35VDC..11x5mm....SHOEI M85°C 828...........390101-05..ELEC RAD
C404..4.7µF..35VDC..11x5mm....SHOEI M85°C 828...........390101-05..ELEC RAD..(c)
------------------------------------------------------------------------------------------
(b) Print on the PCB looks like "173" and can be misstaken for the real 173.
(c) Can be hard to se what goes where by the printing on the PCB for these, looking at the PCB from the front (battery to the left, kickstarts to the right) they are placed like this:
.---------.
|C416|C404|
|----|----|
|C407|....|
.---------.

A3000 Daughterboard: "= COMMODORE A3000 DAUGHTER BD REV 7/01 A/W 313253 FAB 313252 COPYRIGHT 1989 COMMODORE AMIGA INC. GX B-VO 91 38":
------------------------------------------------------------------------------------------
PCB#..Cap....Volt...HxøD....Orinal caps................C= Ass. #..Type......Notes
------------------------------------------------------------------------------------------
C751..22µF...35VDC..11x5mm..ELNA RE2 CE85°C 9135.......390101-04..ELEC RAD..(d)
C600..220µF..16VDC..16x8mm..NICHICON SE(M) 85°C N9138..900101-47..ELEC AXL
C601..220µF..16VDC..16x8mm..NICHICON SE(M) 85°C N9138..900101-47..ELEC AXL
C602..220µF..16VDC..16x8mm..NICHICON SE(M) 85°C N9138..900101-47..ELEC AXL
C603..220µF..16VDC..16x8mm..NICHICON SE(M) 85°C N9138..900101-47..ELEC AXL
------------------------------------------------------------------------------------------
(d) In the Service Manual this reads as 22µF/16VDC but it is not what is mounted on my DB. Also, the C= Ass. # is the same # as in the MB-list for 22µF/35VDC, probably a misprint and should be 22µF/35VDC.

I have not yet replaced caps on my A3000 but I've ordered the following:
-------------------------------------------------
QTY..Cap....Volt...HxøD.....Model
-------------------------------------------------
15...47µF...50VDC..11x6mm...PANASONIC ECA1HHG470
1....100µF..50VDC..11x8mm...PANASONIC EEUFR1H101
7....470µF..25VDC..12x10mm..PANASONIC ECA1EHG471
8....22µF...50VDC..11x5mm...PANASONIC ECA1HHG220
2....4.7µF..50VDC..11x5mm...PANASONIC ECA1HHG4R7
4....220µF..25VDC..18x10mm..VISHAY 222203136221
-------------------------------------------------

Please comment if you see anything wrong or have thoughts about this.
It's a mess trying to make straight columns in a forum as it do not make use of tabs or extra spaces.

Title: Re: Amiga 500 and Amiga 3000 capacitor replacement list
Post by: magnetic on May 19, 2013, 03:21:04 AM

Thank you . Very useful info.

Title: Re: Amiga 500 and Amiga 3000 capacitor replacement list
Post by: mrknight on May 20, 2013, 01:20:33 AM

Thank you for this very useful piece of information! I have some random guru problems and I've started to suspect faulty electrolytic capacitor. This list will help me a lot, thanks!

Title: Re: Amiga 500 and Amiga 3000 capacitor replacement list
Post by: trixeo on June 06, 2013, 10:31:46 AM

For some reason I am unable to edit my own posts.
Anyway, I've now successfully re-capped my A3000 following the list above. It works just fine! Some of the solder joints are a real pain to remove because they are soldered to a big ground area (which dispenses the heat very well) and my soldering iron is only 48W max which had a hard time melting the solder.
At least one of the caps had no "+" markings on the MB (C105: + is towards the CPU) so make sure and make sure again to get the polarity correct. Take a high res photo of the MB before you begin so you can check for polarity later. It's not that hard to find out which is ground though =)

Title: Re: Amiga 500 and Amiga 3000 capacitor replacement list
Post by: powrslave on April 14, 2016, 09:00:02 PM

Thanks and ordered!:cool:

Title: Re: Amiga 500 and Amiga 3000 capacitor replacement list
Post by: vince_6 on April 15, 2016, 03:59:57 PM

Thank you!

Title: Re: Amiga 500 and Amiga 3000 capacitor replacement list
Post by: realloy on April 24, 2017, 04:35:26 PM

Quote from: trixeo;735446

Amiga 500 and Amiga 3000 capacitor replacement list

Hi, I've compiled a list of the capacitors that can be and sometimes should be replaced in both Amiga 500 and Amiga 3000, for my own needs, I'm sharing it here hoping that someone else might find it useful. All information is taken from the Service Manuals of the A500/A3000 respectively. All caps but only a few are "ELEC RAD" (Polarized Radial Aluminum Electrolytic Capacitors). The "ELEC AXL" (Polarized Axial Aluminum Electrolytic Capacitors) are on the A3000 daughterboard. All measurements are ca. in millimetres.

Amiga 500: "Amiga 500 (P) Rev. 6A (WW /89/90)":
-------------------------------------------------------------------------------
PCB#..Cap.....Volt...HxøD.....Orinal caps...........C= Ass. #..Type......Notes
-------------------------------------------------------------------------------
C821..47µF....16VDC..11x5mm...SHOEI M85°C 948.......390101-01..ELEC RAD
C822..47µF....16VDC..11x5mm...SHOEI M85°C 948.......390101-01..ELEC RAD
C812..100µF...16VDC..11x5mm...ELNA RE2 CE85°C 8905..390101-02..ELEC RAD
C811..100µF...16VDC..11x6mm...SHOEI M85°C 918.......390101-02..ELEC RAD
C813..100µF...16VDC..11x6mm...SHOEI M85°C 918.......390101-02..ELEC RAD
C814..100µF...16VDC..11x6mm...SHOEI M85°C 918.......390101-02..ELEC RAD
C815..100µF...16VDC..11x6mm...SHOEI M85°C 918.......390101-02..ELEC RAD
C816..100µF...16VDC..11x6mm...SHOEI M85°C 918.......390101-02..ELEC RAD
C307..470µF...16VDC..12x10mm..SHOEI M85°C 948.......390101-03..ELEC RAD
C303..22µF....35VDC..11x5mm...ELNA RE2 CE85°C 8914..390101-04..ELEC RAD
C304..22µF....35VDC..11x5mm...ELNA RE2 CE85°C 8914..390101-04..ELEC RAD
C324..22µF....35VDC..11x5mm...SHOEI M85°C 918.......390101-04..ELEC RAD..(a)
C334..22µF....35VDC..11x5mm...SHOEI M85°C 918.......390101-04..ELEC RAD..(a)
C306..10µF....35VDC..11x5mm...NICHICON 85°C M8813...390101-06..ELEC RAD
C712..10µF....35VDC..11x5mm...NICHICON 85°C M8813...390101-06..ELEC RAD
C401..3300µF..10VDC..24x13mm..SHOEI M85°C 8d8.......900100-56..ELEC RAD
C402..3300µF..10VDC..24x13mm..SHOEI M85°C 8d8.......900100-56..ELEC RAD
-------------------------------------------------------------------------------
(a) Some say these ones should be changed to a Bi-Polar Capacitor but the original is not.

I've successfully substituded these in my A500 with the following caps from Panasonic:
-----------------------------------------------------
QTY..Cap.....Volt...HxøD.....Model
-----------------------------------------------------
2....10µF....50VDC..11x5mm...PANASONIC ECA1HM100
4....22µF....50VDC..11x5mm...PANASONIC ECA1HM220
2....47µF....50VDC..11x6mm...PANASONIC ECA1HM470
6....100µF...50VDC..11x8mm...PANASONIC EEUFR1H101
1....470µF...25VDC..12x10mm..PANASONIC EEUFR1E471
2....3300µF..25VDC..25x16mm..PANASONIC EEUFR1E332
-----------------------------------------------------
Voltages are not the same as the originals, which I've done by purpose. They are more reliable but a little more expensive.

Amiga 3000 Motherboard: "A3000 COMMODORE B2 FAB 313312 REV 9/03 P/N 313313 REV 9/03 TF/HD/DH/GB/SH/JB/MN":
------------------------------------------------------------------------------------------
PCB#..Cap....Volt...HxøD.....Orinal caps................C= Ass. #..Type......Notes
------------------------------------------------------------------------------------------
C112..47µF...16VDC..11x5mm...NICHICON VX(M) 85°C X9143..390101-01..ELEC RAD
C162..47µF...16VDC..11x5mm...NICHICON VX(M) 85°C X9143..390101-01..ELEC RAD
C164..47µF...16VDC..11x5mm...NICHICON VX(M) 85°C X9143..390101-01..ELEC RAD
C165..47µF...16VDC..11x5mm...NICHICON VX(M) 85°C X9143..390101-01..ELEC RAD
C168..47µF...16VDC..11x5mm...NICHICON VX(M) 85°C X9143..390101-01..ELEC RAD
C169..47µF...16VDC..11x5mm...NICHICON VX(M) 85°C X9143..390101-01..ELEC RAD
C173..47µF...16VDC..11x5mm...NICHICON VX(M) 85°C X9143..390101-01..ELEC RAD
C175..47µF...16VDC..11x5mm...NICHICON VX(M) 85°C X9143..390101-01..ELEC RAD
C407..47µF...16VDC..11x5mm...NICHICON VX(M) 85°C X9143..390101-01..ELEC RAD..(c)
C408..47µF...16VDC..11x5mm...NICHICON VX(M) 85°C X9143..390101-01..ELEC RAD
C899..47µF...16VDC..11x5mm...NICHICON VX(M) 85°C X9143..390101-01..ELEC RAD
C163..47µF...16VDC..11x5mm...SHOEI M85°C 198............390101-01..ELEC RAD
C166..47µF...16VDC..11x5mm...SHOEI M85°C 198............390101-01..ELEC RAD
C167..47µF...16VDC..11x5mm...SHOEI M85°C 198............390101-01..ELEC RAD
C171..47µF...16VDC..11x5mm...SHOEI M85°C 198............390101-01..ELEC RAD
C178..100µF..16VDC..11x6mm...SHOEI M85°C 181............390101-02..ELEC RAD..(b)
C416..470µF..16VDC..12x10mm..ELNA RE2 CE85°C 9127.......390101-03..ELEC RAD..(c)
C160..470µF..16VDC..12x10mm...SHOEI M85°C 178...........390101-03..ELEC RAD
C423..470µF..16VDC..12x10mm...SHOEI M85°C 178...........390101-03..ELEC RAD
C454..470µF..16VDC..12x10mm...SHOEI M85°C 178...........390101-03..ELEC RAD
C460..470µF..16VDC..12x10mm...SHOEI M85°C 178...........390101-03..ELEC RAD
C492..470µF..16VDC..12x10mm...SHOEI M85°C 178...........390101-03..ELEC RAD
C493..470µF..16VDC..12x10mm...SHOEI M85°C 178...........390101-03..ELEC RAD
C105..22µF...35VDC..11x5mm....ELNA RE2 CE85°C 9135......390101-04..ELEC RAD
C107..22µF...35VDC..11x5mm....ELNA RE2 CE85°C 9135......390101-04..ELEC RAD
C113..22µF...35VDC..11x5mm....ELNA RE2 CE85°C 9135......390101-04..ELEC RAD
C317..22µF...35VDC..11x5mm....ELNA RE2 CE85°C 9135......390101-04..ELEC RAD
C318..22µF...35VDC..11x5mm....ELNA RE2 CE85°C 9135......390101-04..ELEC RAD
C433..22µF...35VDC..11x5mm....ELNA RE2 CE85°C 9135......390101-04..ELEC RAD
C443..22µF...35VDC..11x5mm....ELNA RE2 CE85°C 9135......390101-04..ELEC RAD
C190..4.7µF..35VDC..11x5mm....SHOEI M85°C 828...........390101-05..ELEC RAD
C404..4.7µF..35VDC..11x5mm....SHOEI M85°C 828...........390101-05..ELEC RAD..(c)
------------------------------------------------------------------------------------------
(b) Print on the PCB looks like "173" and can be misstaken for the real 173.
(c) Can be hard to se what goes where by the printing on the PCB for these, looking at the PCB from the front (battery to the left, kickstarts to the right) they are placed like this:
.---------.
|C416|C404|
|----|----|
|C407|....|
.---------.

A3000 Daughterboard: "= COMMODORE A3000 DAUGHTER BD REV 7/01 A/W 313253 FAB 313252 COPYRIGHT 1989 COMMODORE AMIGA INC. GX B-VO 91 38":
------------------------------------------------------------------------------------------
PCB#..Cap....Volt...HxøD....Orinal caps................C= Ass. #..Type......Notes
------------------------------------------------------------------------------------------
C751..22µF...35VDC..11x5mm..ELNA RE2 CE85°C 9135.......390101-04..ELEC RAD..(d)
C600..220µF..16VDC..16x8mm..NICHICON SE(M) 85°C N9138..900101-47..ELEC AXL
C601..220µF..16VDC..16x8mm..NICHICON SE(M) 85°C N9138..900101-47..ELEC AXL
C602..220µF..16VDC..16x8mm..NICHICON SE(M) 85°C N9138..900101-47..ELEC AXL
C603..220µF..16VDC..16x8mm..NICHICON SE(M) 85°C N9138..900101-47..ELEC AXL
------------------------------------------------------------------------------------------
(d) In the Service Manual this reads as 22µF/16VDC but it is not what is mounted on my DB. Also, the C= Ass. # is the same # as in the MB-list for 22µF/35VDC, probably a misprint and should be 22µF/35VDC.

I have not yet replaced caps on my A3000 but I've ordered the following:
-------------------------------------------------
QTY..Cap....Volt...HxøD.....Model
-------------------------------------------------
15...47µF...50VDC..11x6mm...PANASONIC ECA1HHG470
1....100µF..50VDC..11x8mm...PANASONIC EEUFR1H101
7....470µF..25VDC..12x10mm..PANASONIC ECA1EHG471
8....22µF...50VDC..11x5mm...PANASONIC ECA1HHG220
2....4.7µF..50VDC..11x5mm...PANASONIC ECA1HHG4R7
4....220µF..25VDC..18x10mm..VISHAY 222203136221
-------------------------------------------------

Please comment if you see anything wrong or have thoughts about this.
It's a mess trying to make straight columns in a forum as it do not make use of tabs or extra spaces.

Amiga 500 C307 470 Uf 16V is Changed to 1000 uf 10V as in A500 plus According to service info, the 470Uf is sitting on the 5v line,, so 10v is more then enough..

Title: Re: Amiga 500 and Amiga 3000 capacitor replacement list
Post by: cdh on October 25, 2017, 05:48:47 AM

Thank you for this excellent guide!  For the Amiga 3000, as trixeo wrote, please be aware of the orientation of C105.  I also recommend watching C178 closely.  On two motherboards I've seen, the silkscreen is cut off to where it looks like C173.

I hope the following is helpful to others -- I put together the following map of the PCB showing cap reference designator and orientation of the + pin:

(http://eebugs.com/cdh/rework/2017_10_24_amiga_3000_motherboard_original_caps_annotated.jpg)

If it's useful, please feel free to share.

** Apologies for the huge image size -- I couldn't figure out how to get the vBulletin IMG tag to resize it down to something which fits reasonable on screen.

Title: Re: Amiga 500 and Amiga 3000 capacitor replacement list
Post by: mambomike on September 27, 2025, 09:13:43 AM

Hi do you still have a copy of the A3000 PCB please ?