Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: JAH on April 18, 2013, 12:43:23 PM
-
I trying use this controller board with IDE HDD, but when i start A2000(kick2.05 rev 37.175), i get only white screen and it's not booting WB21 on HDD which is in FFS format.
I already have set jumper to master in IDE HDD, but i want to know which ones of
those white dip switches should be on or off in the board. I know there are pins on board for additional power led and hdd on/off switch, but what for are pins(down from dip switches)? http://amiga.resource.cx/photos/golemfastscsi,1 I have tried few times change switch positions and every time i get only white screen when starting amiga. According these sites http://www.bboah.com/index.php?action=artikel&cat=59&id=2550&artlang=en and http://amiga.resource.cx/exp/golemfastscsi ,this card support autoboot, so i don't need boot disk?
I have tried find manual for this controller board, but only found those two sites (above links) which have not much info.
-
Anyone have controller like this?
-
I found maybe solution. Some components needs to be re-soldering on the board.