Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: Hiddenevil on February 06, 2013, 10:30:35 AM

Title: Help needed with A3000 default jumper settings
Post by: Hiddenevil on February 06, 2013, 10:30:35 AM

I'm trying to revive my poor A3000, after its psu died a while back. Since the PSU was repaired, I've been having difficulty getting a picture from the A3k. I think this is due to mix up with the jumper settings. As I had installed an A3640 into the machine, which I think is what pushed the old power supply over the edge. Before that, there was a Simm Zip memory adaptor from Amigaworld.de installed in the system.
Because the machine has undergone several upgrades, the jumper settings have been swapped and changed and the original positions forgotten. So I'm seeking help to reset the board back to stock settings. The A3000, is of the 030 25mhz variety.

If anyone can help, it would be really appreciated.
James

Title: Re: Help needed with A3000 default jumper settings
Post by: xPhilx on February 06, 2013, 10:40:42 AM

Here ya go:

http://homepages.ihug.co.nz/~miles.j/amiga.html

Title: Re: Help needed with A3000 default jumper settings
Post by: zipper on February 06, 2013, 10:43:54 AM

http://bboah.amiga-resistance.info/cgi-bin/showhardware_en.cgi?HARDID=22