Amiga.org

Amiga computer related discussion => General chat about Amiga topics => Topic started by: S0nic on February 03, 2013, 02:20:34 PM

Title: QuickJoy JetFighter sv 126 problem
Post by: S0nic on February 03, 2013, 02:20:34 PM

i get today this joystick look very good, i try it on my a500 he go up-down left-right normal , but he don't fire on booth button eaven they are clicking normal and look good not broken , does anyone have some idea where is problem

(http://i39.tinypic.com/28tg5j.jpg)

Title: Re: QuickJoy JetFighter sv 126 problem
Post by: carvedeye on February 03, 2013, 03:23:05 PM

You could clean the contacts with some alcohol that might do the trick, well atleast its worth a try :)

Title: Re: QuickJoy JetFighter sv 126 problem
Post by: S0nic on February 03, 2013, 04:13:00 PM

Quote from: carvedeye;725153

You could clean the contacts with some alcohol that might do the trick, well atleast its worth a try :)

you mean contacts on pin's on joystick?

i try another joystick and work fine on my amiga and c64 so can try to clean only pin's on joystick...

Title: Re: QuickJoy JetFighter sv 126 problem
Post by: ElPolloDiabl on February 03, 2013, 06:17:34 PM

It was common for the wires to rip on these things.
Find someone who is good at soldering (perhaps another Amiga user?)
and have them unscrew it and check the wires haven't come loose.

Title: Re: QuickJoy JetFighter sv 126 problem
Post by: S0nic on February 03, 2013, 06:51:34 PM

Quote from: ElPolloDiabl;725183

It was common for the wires to rip on these things.
Find someone who is good at soldering (perhaps another Amiga user?)
and have them unscrew it and check the wires haven't come loose.

wires in cable or wires into joystick?

Title: Re: QuickJoy JetFighter sv 126 problem
Post by: ElPolloDiabl on February 03, 2013, 07:06:19 PM

The wires inside the joystick. It is probably quite delicate inside. Only open it if you have done it before.
There are wires that go from the fire button to the bottom of the joystick. They connect to a circuit board before going to the cable. (Where the cable comes out of the joystick).
One those wires has probably broken loose.

Title: Re: QuickJoy JetFighter sv 126 problem
Post by: S0nic on February 04, 2013, 04:41:55 AM

Quote from: ElPolloDiabl;725199

The wires inside the joystick. It is probably quite delicate inside. Only open it if you have done it before.
There are wires that go from the fire button to the bottom of the joystick. They connect to a circuit board before going to the cable. (Where the cable comes out of the joystick).
One those wires has probably broken loose.

i do somethinkg like that and now it's working :) i'm not 100% sure whee problem was , but now it's working .. i move autofire button and wires and joystick start to fire :ak47: