Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: Tumbleweed on December 24, 2012, 05:46:05 PM
-
Hi all
I installed a budha Phoenix edition in my a3000t and was able to successfully set up a 20 gig IDE hard drive. Last night I unplugged the budha and moved it to another zorro slot. Now I've got problems. Hdtoolbox won't read the drive details correctly and I can't install the drive. Also the drive shows up as df4 and pc4 when I type info in a shell window.
Any ideas?
Is it possible to kill a budha if I inserted into the zorro slot the wrong way round?
Thanks.
Weed
-
It's possible to kill the card if it's installed upside down. You didn't do that?
Buddha is picky about Zorro slots. On my Amiga if I install it in a "wrong" slot it doesn't detect the hard drive at all.
You moved the card back to the original slot and it didn't work anymore?
Have you cleaned the slots from dirt? Maybe there's a bad connection.