Amiga.org

Amiga computer related discussion => Amiga Software Issues and Discussion => Topic started by: efrenmgp on October 09, 2012, 03:55:57 AM

Title: Disk image device & DMS Files
Post by: efrenmgp on October 09, 2012, 03:55:57 AM: Hello!

I've been trying to mount some DMS files using Disk image device (Fredrik Wikstrom version) but everytime I try the computer resets. One of those attempts succeded but when I tried to access the disk contents the computer rebooted and got stuck rebooting forever... I had to boot with no startup sequence and delete an XML file from ENVARC: DiskImage/ to stop it trying to mount the DMS on every reboot.

Well, as far as I can tell I have all installed correctly, I have xadmaster & xpkmaster libraries... everything listed on the requirements section of the guide (except AISS since that one is just recommended) but still the same problem. Any ideas?

My setup is an A4000D KS3.1 OS3.9 BB2 (Plus Thor's Ram & Shell Updates) and CyberstormPPC

Thanks in advance! :-)

Efrén
Title: Re: Disk image device & DMS Files
Post by: efrenmgp on October 09, 2012, 06:07:02 AM: Just an update... I noticed the DMS file is extracted to a temp directory as an ADF file and then mounted. It is then when the crash occurs. I tried mounting some other ADF files and the same happens so the problem really is: whenever I try to mount an ADF file, the software crashes. It no longer reboots instantly, now it shows a Software Failure dialog:

diskimage.device unit 0
Program failed (error #8000000B)
Wait for disk activity to finish.

Then the buttons Suspend and Reboot.

Any help will be appreciated.
Title: Re: Disk image device & DMS Files
Post by: Dragster on October 10, 2012, 05:53:56 PM: hmmm no one has replied.. probably nobody has had this issue before... I'll try in one of my classics later tonight and will let you know here... or by messenger or phone ;)

Suerte mi pequeño saltamontes,

Dragster.
Title: Re: Disk image device & DMS Files
Post by: itix on October 10, 2012, 06:22:55 PM: Instant reboot is usually result from writing to low memory area. You could try installing Enforcer and send crashlog to author.
Title: Re: Disk image device & DMS Files
Post by: efrenmgp on October 11, 2012, 05:36:11 AM: Quote from: itix;710973
Instant reboot is usually result from writing to low memory area. You could try installing Enforcer and send crashlog to author.

Thanks for the tip, I´ll do that :-)

Efrén
Title: Re: Disk image device & DMS Files
Post by: efrenmgp on October 11, 2012, 06:57:01 AM: OK so I used MuForce (for some reason, Enforcer didn't work for me) and I got this:

Code: [Select]
BYTE WRITE to 00000000 data=81 PC: 082E8518 USP : 090E1560 SR: 2008 (S0)(-)(-) TCB: 090D98E8 Data: 090C0081 090C0388 090C815C 00000200 00000200 08DA5E9C 08DA35CC 00000040 Addr: 00000000 090C815C 00000000 00000000 0804885C 02368767 080023B4 08002344 Stck: 090C7D78 090C7D40 090B8720 0804885C 090C1D74 090B8720 02368767 0844B944 Stck: 00000000 000DC000 08DA35CC 00000040 08DAECBC 00000001 00000038 00000000 Name: "diskimage.device unit 0" BYTE WRITE to 00000002 data=5C PC: 082E8520 USP : 090E1560 SR: 2000 (S0)(-)(-) TCB: 090D98E8 Data: 090C815C 090C0388 090C815C 00000200 00000200 08DA5E9C 08DA35CC 00000040 Addr: 00000002 090C815C 00000002 00000000 0804885C 02368767 080023B4 08002344 Stck: 090C7D78 090C7D40 090B8720 0804885C 090C1D74 090B8720 02368767 0844B944 Stck: 00000000 000DC000 08DA35CC 00000040 08DAECBC 00000001 00000038 00000000 Name: "diskimage.device unit 0" Exception !! 0000000B TCB: 090D98E8 CTX: 08DDC2C8 SSP: 080023B8 USP : 090E1560 SR: 0018 (U0)(-)(-) TCB: 090D98E8 Data: 00000000 090C815C 08DA5E9C 00000200 00000200 08DA5E9C 08DA35CC 00000040 Addr: 00000000 090C815C 090C7D40 00000000 0804885C 02368767 08DAABCC 080023B8 Stck: 090C7D78 090C7D40 090B8720 0804885C 090C1D74 090B8720 02368767 0844B944 Stck: 00000000 000DC000 08DA35CC 00000040 08DAECBC 00000001 00000038 00000000 Name: "diskimage.device unit 0"

I've sent it to the author, let's hope he has a chance to take a look and help.

Regards,
Efrén