Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: blakespot on August 05, 2012, 11:34:45 PM
-
I have an A1200 '060 tower. It has a physical disk ... with issues. I am trying to get it going with one of those SCSI emulator boards w/ a CF card adapter. I hook it up, but on boot I get Guru 8000 000B with the bundled boot volumes on the CF card.
Is that because I have an '060? Wanted to start a thread here for help and to tell the progress tale.
Thanks.
bp
-
I'm afraid I can't figure out your hardware setup from the post
-
I'm afraid I can't figure out your hardware setup from the post
Here is what his sig link says
This is the second Amiga 1200 I've towered. (See the first here.) For this project I utilized a "Noblesse" custom tower from Revanche, LLC. It's a stylish unit that is compatible with several popular busboards, etc.
All parts were gathered, new, in late 2004 aside from the Blizzard A1260 accelerator with 66MHz 68060 (an overclocked 60MHz processor) and Blizzard SCSI module, which were used items. A FlickerMagicT scan doubler / flicker-fixer was used to allow the use of a standard 31kHz VGA display which, in this case, is a 19" Sony CRT on a KVM.
I use this system primarily for demos and games. A demo running on this level of hardware is much more impressive, relatively speaking, than those running on current, many-gigahertz, 3D accelerated PCs.
38 photos | 2,706 views
items are from between 01 Jun 2002 & 03 Aug 2010.
-
perhaps you need to modify maxtransfer value.