Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: Dr.Bongo on May 20, 2012, 12:44:44 PM
-
Recently bought a Mk1 Cyberstorm 060/50 for my A4k but it doesn't seem to work. Wondering if it's faulty of I've missed something?
Amiga 4000 RevB ,Kickstart 3.1 / Cyberstorm Mk1 060/50, 96mb (2 x 32, 2x16)
The A4k is running on a A3640@33mhz so jumpers 100 and 104 under the cpu are already set to external.
All I get is a black screen, constant HDD LED , no floppy click and no early boot up with mouse buttons held. I have stripped the machine down to just motherboard,cyberstorm and floppy but get the same result.
If I plug my A3640 back in it fires straight up, it also works fine with it's original 030 (jumpers moved of course)
I have reseated all the parts of the cyberstorm and checked the jumpers are in the factory positions. I have also tried it without its memory tower and just having J100 set to ext.
Is there anything I've possibly missed or is the card dead?
Thanks in advance.
-
have you installed the 68060.library?
or better the one bundled with this (http://phase5.a1k.org/download.php?f=1012ac15199983ed0c2e88b19c0667a7&countonly=1)archive?
http://phase5.a1k.org/index.php?driverslibraries
-
Yes I used the cyberstorm install disk. But it's not even attempting to boot so I'm pretty sure that's not the issue. Thanks anyway.
-
Ah-ah! fixed it. Damn Diagnostic jumper had 'jumped' off during transit.