Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: chkamiga on January 14, 2004, 04:41:14 PM

Title: Blizzard PPC&CV64/3D Problem
Post by: chkamiga on January 14, 2004, 04:41:14 PM

I have Postet this already at www.amiga-news.de
But nobody have a solution.

I have a A1200 with a ZorroIV-Board and a
BlizzardPPC with 240 MHZ and 060/50MHZ.

The System crash if a Cybervision(CGFX4.x) Screen
is open and a SCSI-acess is made.

The SCSI Bus is Okay, the BPPC alone is Okay.
The Jumper on the ZIV-Board are right.
The Energy +5 Volt Okay.

Maybe there are problems with the CV64/3D.
No anyone about Hardwareconflicts?
Maybe someone have a solution for that?

Title: Re: Blizzard PPC&CV64/3D Problem
Post by: Framiga on January 14, 2004, 05:02:13 PM

Hi chkamiga

how can you say, that the PSU is OK?

Reseat ALL the socketed boards and, if you can try with an another PSU.

GFX card screen + SCSI access= a lot of load on PSU.

Ciao

Title: Re: Blizzard PPC&CV64/3D Problem
Post by: chkamiga on January 14, 2004, 05:52:52 PM

I Have a 230 or 250 Watt PSU. I have try it with
2 PSU one for the HDs/CDRoms and one for the
other. It dont Work. I have make a bypass between
+5V and the BPPC. It dont work.
I have buy a new A1200 Mainboard, it dont
Work.
Maybe i should buy a new ZIVBoard or a new
Grafik card.