Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: runequester on January 12, 2012, 04:55:16 AM
-
I have an ACA 1230/56. What is needed to add a battery to it, for a battery backed clock? Any soldering or?
-
Back in the days where AmigaKit provided a kit (https://amigakit.leamancomputing.com/catalog/product_info.php?products_id=1006) it had the following:
ACA 1230 Real Time Clock Upgrade Kit is a Real Time Battery Backed Up clock chip and coin battery for the ACA 1230 Accelerator (https://amigakit.leamancomputing.com/catalog/)
Clock chip and battery can be installed onto the sockets provided on the accelerator.
Package Contents:
(https://amigakit.leamancomputing.com/catalog/images/bullet.jpg) OKI M6242B (Or Equivalent) Clock Chip
(https://amigakit.leamancomputing.com/catalog/images/bullet.jpg) CR1220 Coin Battery
So you only need the Clock Chip (if you don't have already) and an CR1220 battery :)
-
Here is the ACA Real Time Clock Kit (In Stock):
http://amigakit.leamancomputing.com/catalog/product_info.php?products_id=1006
-
ah nice. I had looked a while back and it had shown out of stock.
So no soldering needed then or? This looks like it just slots in. What about the battery?
-
As Whitesnake would put it just
"Slide it in!"
So just insert the coin battery in the coin slot and you're set :)
-
No soldering involved. Just push the chip and slide battery in.
Thank you.
-
order placed :)