Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: lumby on December 25, 2011, 04:03:14 PM

Title: RTL8029as not working OS4.1 Classic
Post by: lumby on December 25, 2011, 04:03:14 PM

Hi All

I was happy to find a copy of OS4.1 Classic under the christmastree

But I Can not get my RTL8029as to work whit the rtl8029.device
It say Can not open port 0
The card i from Amigakit and it was descriped to be OS4.1 compatibel.

My setup is a A4000 whit a Mediator.
All jumpers is closed at descriped In the FAQ on the OS4.1 cd
The second card is a Radin 9250 256mb from Elbox

I have no other card indtalled at this time!

Hope some of you Can help me!
Merry Christmas to you all

Title: Re: RTL8029as not working OS4.1 Classic
Post by: HammerD on December 25, 2011, 05:22:38 PM

Quote from: lumby;672843

Hi All

I was happy to find a copy of OS4.1 Classic under the christmastree

But I Can not get my RTL8029as to work whit the rtl8029.device
It say Can not open port 0
The card i from Amigakit and it was descriped to be OS4.1 compatibel.

My setup is a A4000 whit a Mediator.
All jumpers is closed at descriped In the FAQ on the OS4.1 cd
The second card is a Radin 9250 256mb from Elbox

I have no other card indtalled at this time!

Hope some of you Can help me!
Merry Christmas to you all

Merry Christmas :) Is the card showing up in Ranger?  It should be listed under PCI devices.  First place to check.  Try another PCI slot also...and does the card work under OS 3.9?

Title: Re: RTL8029as not working OS4.1 Classic
Post by: lumby on December 25, 2011, 06:35:04 PM

Hi

Yes the card are in the Ranger PCI device list.
I have tryed to move the card to other PCI slot.
And yes it works under OS3.9

Best regards ;-)

Title: Re: RTL8029as not working OS4.1 Classic
Post by: HammerD on December 25, 2011, 06:58:58 PM

Quote from: lumby;672863

Hi

Yes the card are in the Ranger PCI device list.
I have tryed to move the card to other PCI slot.
And yes it works under OS3.9

Best regards ;-)

Ok, you did use the internet connection wizard? It should automatically identify the card and setup the proper entries in devs:netinterfaces.

Title: Re: RTL8029as not working OS4.1 Classic
Post by: lumby on December 25, 2011, 07:29:20 PM

Yes I used the internet connection wizard.
But it says nothing found!
The I have tryed the manuel way.
Selected rtl8029.device and then the test bottom.