Amiga.org

Amiga computer related discussion => Amiga Marketplace => Topic started by: TheDaddy on November 27, 2011, 07:51:04 PM

Title: Latest batch of Minimig cases available now
Post by: TheDaddy on November 27, 2011, 07:51:04 PM
Hi everyone,

The latest batch of Minimig cases is here:

http://www.loriano.pwp.blueyonder.co.uk/Scelta.htm

A big thank you to all the people who pre-ordered one, yours is packed and ready to go this coming week, there are now less than 10 left so get one while you can. :-)

Thanks again.
Title: Re: Latest batch of Minimig cases available now
Post by: bbond007 on November 27, 2011, 10:46:53 PM
Quote from: TheDaddy;669259
Hi everyone,

The latest batch of Minimig cases is here:

http://www.loriano.pwp.blueyonder.co.uk/Scelta.htm

A big thank you to all the people who pre-ordered one, yours is packed and ready to go this coming week, there are now {b]less than 10 left[/b] so get one while you can. :-)

Thanks again.

How much do they cost?

I have been searching all over your link and can't find a price. Is this one of those deals where if you have to ask the price then you can't afford it?

thanks,

nate

thanks
Title: Re: Latest batch of Minimig cases available now
Post by: Methanoid on November 28, 2011, 07:29:40 AM
There is an email address on the site where it says 10 are available. Why not email and ask rather than ask here where there is less chance of an answer? duh?!
Title: Re: Latest batch of Minimig cases available now
Post by: bbond007 on November 28, 2011, 07:35:45 AM
Quote from: Methanoid;669332
There is an email address on the site where it says 10 are available. Why not email and ask rather than ask here where there is less chance of an answer? duh?!


Thanks for the friendly suggestion.
Title: Re: Latest batch of Minimig cases available now
Post by: TheDaddy on November 28, 2011, 11:47:25 AM
Sorry my fault :)

Please email me:

amigarulez@hotmail.com

By the way got your messages bbond007 ;)

Sorting one out for you tonight.

Thanks again.
Title: Re: Latest batch of Minimig cases available now
Post by: TheDaddy on November 30, 2011, 10:35:13 AM
Just to say thanks to all the people who have ordered one, I am doing my best to test them, apply the rubber feet, pack them and taking them to the post office as fast as possible.

I also believe to have emailed the manual to everyone...if not just email me and I'll send it again.

Thanks for your patience.

Some photos while you wait:

http://www.loriano.pwp.blueyonder.co.uk/latest.htm

PS: Yes I did take the photos in my kitchen. :)
Title: Re: Latest batch of Minimig cases available now
Post by: skurk on November 30, 2011, 12:02:04 PM
Quote from: Methanoid;669332
There is an email address on the site where it says 10 are available. Why not email and ask rather than ask here where there is less chance of an answer? duh?!


Because he is here, and maybe others have the same question?

I would like to know the price as well.  Hey, let's all e-mail him the same question!
Title: Re: Latest batch of Minimig cases available now
Post by: ToddH on November 30, 2011, 03:46:01 PM
TheDaddy...

You ever though of making a similar case for the Natami?
Title: Re: Latest batch of Minimig cases available now
Post by: jj on November 30, 2011, 04:00:17 PM
How can he make a case for a product that does not exist yet ?
Title: Re: Latest batch of Minimig cases available now
Post by: TheDaddy on December 17, 2011, 08:38:11 PM
Only 5 left - 3 in black and 2 in white

Thanks! :)
Title: Re: Latest batch of Minimig cases available now
Post by: Forcie on December 17, 2011, 09:08:57 PM
Quote from: JJ;669614
How can he make a case for a product that does not exist yet ?

The Natami boards me and other team members are using are using exactly same design that is going to be sold to the public. That means same form factor (Mini-ITX compatible), same measurements (170x140mm), same connector placement, same power requirements etc. So its perfectly possible to make a case design if one wanted to, and I am not sure what you are on about.
Title: Re: Latest batch of Minimig cases available now
Post by: Everblue on December 17, 2011, 09:32:30 PM
And I guess the above applies to Arcade FPGA too?
Title: Re: Latest batch of Minimig cases available now
Post by: TheDaddy on December 21, 2011, 10:50:26 PM
I just wanted to show how one of my customers has customised his black Minimig case, I think it looks brilliant! :)

http://www.loriano.pwp.blueyonder.co.uk/customised_minimig_case.htm
Title: Re: Latest batch of Minimig cases available now
Post by: Everblue on December 29, 2011, 02:33:00 PM
TheDaddy do you plan to make a case for Arcade FPGA =)
Title: Re: Latest batch of Minimig cases available now
Post by: TheDaddy on December 29, 2011, 02:59:33 PM
Quote from: Nostromo;673377
TheDaddy do you plan to make a case for Arcade FPGA =)


Yes. :)
Title: Re: Latest batch of Minimig cases available now
Post by: Everblue on December 29, 2011, 03:13:29 PM
Quote from: TheDaddy;673382
Yes. :)


Awesome =)

As (hopefully) I'm getting an arcade FPGA soon, what kind of PSU do you suggest I buy, so I can put it in one of your cases once these are available?

Thanks!
Title: Re: Latest batch of Minimig cases available now
Post by: TheDaddy on December 29, 2011, 03:17:31 PM
Thread started:

http://www.amiga.org/forums/showthread.php?p=673385#post673385

Regarding the psu we need to confirm with Mike if he'll be providing one or if the user will be providing their own (picoPSU comes to mind).

:)