Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: pan1k on November 22, 2011, 03:58:44 PM

Title: Cybervision 64/3D Red Vertical Lines
Post by: pan1k on November 22, 2011, 03:58:44 PM

Hey guys, my A4T has been running pretty sweet, the last few months I have been getting strange vertical red lines on my workbench. I used DeOxit thinking that perhaps the Zorro daughterboard was oxidized. I swapped cables, swapped monitors, problem persists. If I jiggle the vga cable it clears up for a second. on a whim, i changed from a 16bit to a 15bit screenmode, and it cleared up. Do you think it's a hardware issue, or perhaps corrupted drivers?

Title: Re: Cybervision 64/3D Red Vertical Lines
Post by: Digiman on November 22, 2011, 05:52:06 PM

Dry joint on video out port of card I reckon if wiggling cable always has an effect.

Title: Re: Cybervision 64/3D Red Vertical Lines
Post by: pan1k on November 22, 2011, 06:00:05 PM

Doesn't always work. I am going to try to uninstall CGX tonight and reinstall. I am also using the scandoubler for the Cybervision64/3D.