Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: tabuhuso on October 08, 2011, 11:51:46 PM

Title: warp engine help
Post by: tabuhuso on October 08, 2011, 11:51:46 PM: Hi all
can anybody help me for my warpengine ?
I bought this card on ebay but I can't use. I need a working card detail pictures
jumper detail,cpu mhz , chrystal mhz and ram size and ram speed detail...
Card no boot only black screen (4000 clock jumper external position)
Title: Re: warp engine help
Post by: number6 on October 08, 2011, 11:58:50 PM: Quote from: tabuhuso;662982
Hi all
can anybody help me for my warpengine ?
I bought this card on ebay but I can't use. I need a working card detail pictures
jumper detail,cpu mhz , chrystal mhz and ram size and ram speed detail...
Card no boot only black screen (4000 clock jumper external position)

these pics and the .pdf might help (http://amiga.resource.cx/exp/search.pl?product=warpengine&company=)

#6
Title: Re: warp engine help
Post by: Vlabguy1 on October 09, 2011, 02:29:56 AM: I hope you got the working..

Rich
ny
@#6 htanks for posting that link.. I have a couple Warp's and this info may come in
handy in da future.
Title: Re: warp engine help
Post by: bigmac on October 09, 2011, 04:21:18 AM: Hi! your mobo jumpers should remain the same as for a standard 68040 cpu card try this setup, or perhaps the clock crystal on the Warp Engine has blown or has come adrift and has been put in the wrong way round you should also check your memory config and jumper settings my friend
cheers
Title: Re: warp engine help
Post by: Amiwest on October 09, 2011, 06:27:23 AM: There is a manual listed at:
http://amiga-manuals.xiik.net/hardware/index.php
Title: Re: warp engine help
Post by: tabuhuso on October 09, 2011, 11:28:52 PM: I know this site
http://amiga.resource.cx/exp/search.pl?product=warpengine&company=
but card still don't working. I need working system detail picture from any forum person...
Title: Re: warp engine help
Post by: mechy on October 09, 2011, 11:55:38 PM: Quote from: tabuhuso;663063
I know this site
http://amiga.resource.cx/exp/search.pl?product=warpengine&company=
but card still don't working. I need working system detail picture from any forum person...

i dont see how that will help, we have no idea what ram you have on it,so we cant suggest jumpers. also you don't say if your using a scsi HD or what.

the manual listed earlier tells you all jumpers.generally if you have 16 or 32MB simms in the slots, then jumpers A&B should not be shorted.jumper D should not be shorted if you are using 60ns ram.Jumpers should be installed on HJK and L...no other jumpers installed.

that should get you up and running. warp engine came in 28,33 and 40mhz. if your oscillator is 40msz then the cpu is at 40.

Mech
Title: Re: warp engine help
Post by: mousehouse on October 10, 2011, 04:44:50 AM: The WE should run without memory and SCSI disabled, I would try that first. At boot you should hear a "gong" sound, if not something is wrong with the card. Do you have any way to test the CPU?