Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: dacavin on September 26, 2011, 07:53:13 AM
-
I am moving and we had an Amiga system some years ago for audio video production. I still have this hardware and I hate to just throw it out of send it to some recycling place if someone has a need for it. Contact me at dacavin@yahoo.com.
We used it to lay video behind keygen text on video screens with Scala software.
Serial Number SGX 40616 0087
MADE IN 1993
has RGB cable attached
here is a link to a picture of a similar unit.
http://bboah.amiga-resistance.info/cgi-bin/showhardware_en.cgi?HARDID=400
- genlocks to Y/C or Composite video
- encodes Amiga RGB into Y/C or Composite video
- overlays Amiga graphics onto external Y/C or Composite video
- transcodes between Y/C and Composite
- selectable 3.58 MHz notch filter
- computer controllable dissolve of 64 levels
- selectable internal and external blanking source
- AGA compatible
- NTSC only
connectors
- RGB In - receives the RGB output from the Amiga
- RGB Out - display Amiga graphics on an RGB monitor
- Key Out (BNC) - key signal for video switcher, tells when Amiga colour 0 is present or not
- Composite In (BNC), S-Video In - source video from VTR, sync-generator, etc.
- Composite Out (BNC), S-Video Out - combined output of input video and the encoded Amiga graphics
- Remote controller (RJ-11)
controls
- graphics dissolve slider - controls the percentage of foreground graphics against external video
- background dissolve slider - controls the percentage of background colour against external video
- S-Video select switch - toggles between S-Video and Composite inputs
- genlock disable switch for productivity mode use
- interpretive dissolve switch - controls whether or not the darkness of an Amiga colour is to be interpreted as a level of dissolve
- notch filter switch - removes colour artifacts or some forms of flicker
-
PM sent
-
@Bigbronc
If he lists his email address it might be more effective if you send an email to him instead of a PM.
-
I did, no reply so far, :roflmao:but If he reads this again, I will give it a good home and match it up with a Toaster I am building.:)