Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: Blendor_POLAND on August 28, 2011, 08:32:28 PM

Title: Scandoubler Compserv LCD TFT MONITOR?
Post by: Blendor_POLAND on August 28, 2011, 08:32:28 PM

Hallo  
I have a question,  Compserv Scandoubler works with lcd monitor?

Title: Re: Scandoubler Compserv LCD TFT MONITOR?
Post by: tone007 on August 28, 2011, 09:10:01 PM

Yes, though PAL (50Hz) modes may cause trouble with LCD monitors that don't support it, as with any other scandoublers besides Indivision.

Title: Re: Scandoubler Compserv LCD TFT MONITOR?
Post by: Blendor_POLAND on August 29, 2011, 01:59:49 PM

thanks ;) for your answer

Title: Re: Scandoubler Compserv LCD TFT MONITOR?
Post by: Crumb on August 29, 2011, 03:51:35 PM

@tone007

Indivision *and* Picasso4 ;-)

Title: Re: Scandoubler Compserv LCD TFT MONITOR?
Post by: tone007 on August 29, 2011, 04:10:46 PM

Ooo, didn't know a PIV would take care of that too, good info.

Title: Re: Scandoubler Compserv LCD TFT MONITOR?
Post by: Blendor_POLAND on August 29, 2011, 04:19:40 PM

indivision aga4000 is not available :(( in amigakit.com :((( picasso IV is not in my budget

Title: Re: Scandoubler Compserv LCD TFT MONITOR?
Post by: zipper on August 29, 2011, 04:24:39 PM

Quote from: tone007;656697

Ooo, didn't know a PIV would take care of that too, good info.

50 - 160 Hz AFAIR - adjustable via PMTNG.

Title: Re: Scandoubler Compserv LCD TFT MONITOR?
Post by: Blendor_POLAND on August 29, 2011, 04:36:59 PM

and MONITOR LCD with TV ? for example Samsung Syncmaster710mp maybe work with  Compserv Scandoubler in PAL GAMES 50hz?


I found one Monitor LCD with work 47-86hz

MODEL:  ColorEdge CG223W EIZO

Title: Re: Scandoubler Compserv LCD TFT MONITOR?
Post by: zipper on August 29, 2011, 05:12:18 PM

That Samsung specs seem to be 56 - 75 Hz; can't say what it does with a PAL
feed into the inputs: "RGB Analog, Separate H / V sync, Composite ,
0.7Vp-p Positive at 75 ohm, TTL level positive or negative". But as it supports PAL,Secam and NTSC it should work.

Title: Re: Scandoubler Compserv LCD TFT MONITOR?
Post by: zipper on August 29, 2011, 05:15:48 PM

Quote from: Blendor_POLAND;656704

I found one Monitor LCD with work 47-86hz
MODEL:  ColorEdge CG223W EIZO

Most BenQs start from 24 kHz like mine - it supports even 44 Hz and upto 75 Hz in 3 steps.

Title: Re: Scandoubler Compserv LCD TFT MONITOR?
Post by: Blendor_POLAND on August 29, 2011, 06:44:42 PM

this means that the monitor like Yours, work no problem with SC ARXON COMPSERV in 50hz PAL GAMES ? sorry mein english is no good:)

what model You have?

Title: Re: Scandoubler Compserv LCD TFT MONITOR?
Post by: amiga4000freak on August 29, 2011, 07:09:05 PM

hi

Synchronization Range - Horizontal31 - 81 kHz is this what you mean because there is one on ebay but has only got a responce time of 25ms

Title: Re: Scandoubler Compserv LCD TFT MONITOR?
Post by: bbond007 on August 29, 2011, 07:49:49 PM

Quote from: Blendor_POLAND;656700

indivision aga4000 is not available :(( in amigakit.com :((( picasso IV is not in my budget

I have been wanting an Indivision AGA for years now... Just not willing to pay EBAY prices.

You could always sell the scandoubler and get the Dell SR2320L monitor. I just got this monitor and I'm very happy with it for use with my A1200.

http://www.amiga.org/forums/showthread.php?t=58860

Title: Re: Scandoubler Compserv LCD TFT MONITOR?
Post by: Blendor_POLAND on August 29, 2011, 08:11:16 PM

its great :) LCD multisync , but is not available in polish allegro or ebay