Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: dwaldrop on June 28, 2011, 01:08:44 PM

Title: Has anyone put a CF drive into a 2000?
Post by: dwaldrop on June 28, 2011, 01:08:44 PM

I see a lot of 1200s running CF drives.  \

Has anyone done the same on a 2000?  

If so, how?

Thanks!

Title: Re: Has anyone put a CF drive into a 2000?
Post by: mechy on June 28, 2011, 02:22:41 PM

Quote from: dwaldrop;647453

I see a lot of 1200s running CF drives.  \

Has anyone done the same on a 2000?  

If so, how?

Thanks!

Of course. all you need is a ide controller like the Buddha flash  and a ide to cf adapter or a scsi controller like the A2091 or GVP etc. and this: :idea:

  http://a4000t.com/store/index.php?main_page=product_info&cPath=65_79&products_id=180

(/end shameless plug):crazy:

-Mech-

Title: Re: Has anyone put a CF drive into a 2000?
Post by: desantii on June 28, 2011, 02:24:36 PM

I have one in my A2000 with a similar solution, I go though a SCSI- IDE adapter and then use a CF card on the IDe side.
 
I get the SCSI from my GVP 030 card

Title: Re: Has anyone put a CF drive into a 2000?
Post by: mechy on June 28, 2011, 03:11:58 PM

Quote from: desantii;647460

I have one in my A2000 with a similar solution, I go though a SCSI- IDE adapter and then use a CF card on the IDe side.
 
I get the SCSI from my GVP 030 card

Good call there. I completely forgot about the Acard AEC-7720U scsi to ide adapters and others(data i/o,yamaha).. but they are getting a bit scarce these days.

mech