Amiga.org

The "Not Quite Amiga but still computer related category" => Amiga Emulation => Topic started by: Super TWiT on April 19, 2011, 07:45:44 PM

Title: UAE + KS1.3 Doesn't See Hardfile
Post by: Super TWiT on April 19, 2011, 07:45:44 PM

I made a 512 mb hardfile (since some installers don't work if you have too much free space) and gave it an rdb using hdtoolbox and wb3.1 (and I installed the FastFileSystem file into WB 3.1)  Thus, the fastfilesystem file should be included inside the rdb.  However, KS 1.3 never sees it.  Also, it is included in the Rom directory.  Any ideas?

Title: Re: UAE + KS1.3 Doesn't See Hardfile
Post by: x303 on April 19, 2011, 08:04:24 PM

Kick 1.3 didn't had fastfilesystem in ROM yet (v37+), but loads it's off disc (usually it's placed in the L: directory).

Title: Re: UAE + KS1.3 Doesn't See Hardfile
Post by: Thomas on April 19, 2011, 09:03:10 PM

Make sure that both FastFileSystem and the partition have the same identifier of
0x444F5301. Do not use international or directory cache options.

Title: Re: UAE + KS1.3 Doesn't See Hardfile
Post by: Super TWiT on April 20, 2011, 06:21:27 PM

Quote from: Thomas;632507

Make sure that both FastFileSystem and the partition have the same identifier of
0x444F5301. Do not use international or directory cache options.

I am not exactly sure what that means.  Is that in the RDB?

Title: Re: UAE + KS1.3 Doesn't See Hardfile
Post by: kolla on April 20, 2011, 06:41:52 PM

And 1.3 kickstart contains scsi.device?

Title: Re: UAE + KS1.3 Doesn't See Hardfile
Post by: Thomas on April 20, 2011, 07:46:15 PM

Use HDToolbox.

(http://thomas-rapp.homepage.t-online.de/download/filesystem.png)