Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: Claw22000 on April 13, 2011, 03:51:29 PM

Title: PFS3 help.
Post by: Claw22000 on April 13, 2011, 03:51:29 PM

I just got this and want to give it a try.  I'm doing this in WinUAE before attempting to do it on the real Amiga.

I do know I must use the loadmodule scsi.device  I have done this and the HDinsttools still dosn't see the full size of the disk (10G)  I'm going to have to redo this on a 60 and 30 later so if I can't make a 10 go I won't be usable on my system.  I don't wanna be stuck with SFS if this is MUCH fast.  Please help

Title: Re: PFS3 help.
Post by: Claw22000 on April 13, 2011, 03:59:02 PM

Well Nevermind figured it out you have to use the HDtoolbox in the WB install disk to let you set the drive up initially after that reboot and HDinsttools sees the full size.

Title: Re: PFS3 help.
Post by: rubenscarrilho on April 13, 2011, 05:49:44 PM

Claw22000,

Do not use DHToolBox, use only HDInstTools.

It works like charm.

___________________________
          Rubens / Brazil
- Amiga 500/ROM3.1/A590/A570/2MbChip/Mtec68020/4MbFast/Indivision Scandoubler/Ext.A1011
- Amiga 1200/ROM3.1/2MbChip/Apollo68040/32MbFast/Floppy Emulator/10Gb HD/Ext.A1011
- Amiga 4000D/ROM3.1/2MbChip/A3640/16MbFast/Floppy Emuloator/40Gb HD/NewTek Toaster 4000
- Amiga  4000T/ROM3.1/2MbChip/CyberStorm68060/128MbFast/Floppy Emuloator/40Gb  HD/72GbSCSI/NewTek Toaster 4000/NewTek Toaster Flyer