Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: tweek on December 18, 2003, 04:18:13 PM

Title: Problems with Mediator 4000Di / CyberVision 64
Post by: tweek on December 18, 2003, 04:18:13 PM

I finally got my Mediator 4000Di.
I installed it after reading the manual.
The only trouble is now, that I can't run PCIInfo (or load pci.library) when my CyberVision 64 is active without a system freeze.

Anyone have any idea how to solve this problem?

Btw. the swap config jumper is closed (like said in the manual).

-Tweek

Title: Re: Problems with Mediator 4000Di / CyberVision 64
Post by: Crumb on December 18, 2003, 05:03:24 PM

The swap config jumper is the one used to select a Z3 gfx card or a PCI gfx card?

Title: Re: Problems with Mediator 4000Di / CyberVision 64
Post by: tweek on December 18, 2003, 10:47:29 PM

There are three jumpers:

Master:
Open -   With SharkPPC(+) G3/G4 card installed.
Closed - Without SharkPPC(+) G3/G4 card installed.

Winsize:
Open -   Default.
Closed - With Voodoo4 or Voodoo5 PCI graphic card installed.

Swap config:
Open -   Default.
Closed - With Zorro III graphic card installed.

In my case only the Winsize jumper should be open.

-Tweek

Title: Re: Problems with Mediator 4000Di / CyberVision 64
Post by: ikir on December 18, 2003, 11:08:52 PM

Try to write to support@elbox.com

Usually they reply very soon :-)

Title: Re: Problems with Mediator 4000Di / CyberVision 64
Post by: tweek on December 19, 2003, 04:38:32 PM

@ ikir:

Seems like an idea. I'll try it.

-Tweek