Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: ozkano on December 02, 2010, 06:30:34 AM

Title: Pegasos 2 does not boot
Post by: ozkano on December 02, 2010, 06:30:34 AM

my pegasos 2 is broken a while, I connect via serial port with telnet and it stuck here, any suggestion


PegasosII Boot Strap (c) 2002-2003 bplan GmbH
Running on CPU PVR:00083311
Enable L1 ICache...                                                    Done.
Reading W83194 : 00FFFFFFFFFF0000                                      Done.
Setting Front Side Bus to 133MHz...

Title: Re: Pegasos 2 does not boot
Post by: stachu100 on December 02, 2010, 10:47:24 AM

Was CPU overclocked?
No problem with fan on CPU?
There are 3 things you can do by yourself:
1) try to re-seat al the boards/RAM modules/CPU modules/HDD cables to eliminate bad contact somewhere
2) replace graphics card
3) replace CPU module - not easy to find spare and 100% working, I know...

If no joy - send it to bplan for repair. :-(

Title: Re: Pegasos 2 does not boot
Post by: ozkano on December 02, 2010, 01:31:11 PM

the testing configuration is,
main board
cpu board
and ram

cpu is getting hot it has no fan on it, only heat sink

also I am looking for spare cpu modules, als have you sold your 68060 cpus, I need x 2

Title: Re: Pegasos 2 does not boot
Post by: ozkano on December 02, 2010, 01:42:02 PM

http://1.bp.blogspot.com/_KDVGyWcpAvM/TPfmOs71uGI/AAAAAAAABMU/FFuBRZ7oig8/s1600/Pegasos%2B2.jpg

Title: Re: Pegasos 2 does not boot
Post by: stachu100 on December 02, 2010, 08:58:09 PM

Quote from: ozkano;596358

also I am looking for spare cpu modules, als have you sold your 68060 cpus, I need x 2

Yes, I still have MC68060RC50 mask 71E41J (rev6) for sale. PM me if you are interested.