Amiga.org
Operating System Specific Discussions => MorphOS => MorphOS -- Hardware requirements and availability discussion => Topic started by: Fingers on November 27, 2010, 07:50:51 AM
-
Hi all,
Is this model supported?
I get "Quark/OpenFirmware Console Failed" when trying to install.
Also, if it is supported, will using a non-supported graphics card cause this? I've not got the original card, there is an ATI 9200 128mb card installed.
Or maybe I need to do a firmware upgrade first?
Any help greatly appreciated.
PZ.
-
Is this model supported?
It is not supported. This Power Mac doesn't have an AGP slot.
Supported models are:
System ID Model
Power Mac 3,1 AGP-Graphics
Power Mac 3,2 AGP-Graphics
Power Mac 3,3 Gigabit Ethernet
Power Mac 3,4 Digital Audio
Power Mac 3,5 - Quick Silver
- Quick Silver 2002
Power Mac 3,6 - Mirrored Drive Doors
- FW 800
- Mirrored Drive Doors 2003
Power Mac 3,4 to 3,6 have audio support for the integrated audio chip (for other models it's possible to use a supported PCI audio card of course). Some very early models have a network chip that is not supported by the included network driver (but you can work around this by using a PCI network card, such as RTL8139).
MorphOS 2.6 release has a problem with 7450 CPU. This will be addressed in the MorphOS 2.7 release that should arrive shortly.
-
It is not supported. This Power Mac doesn't have an AGP slot.
Oh well, only cost me $10...just another for my Mac collection then.
Thanks for letting me know :)
PZ.
-
MorphOS 2.6 release has a problem with 7450 CPU. This will be addressed in the MorphOS 2.7 release that should arrive shortly.
MorphOS 2.7 (http://www.morphos-team.net/news.html) addresses the 7450 issue.
-
Beat you to it by about 6 mins :)
Though I am sure there is a news item waiting to be approved :)
http://www.amiga.org/forums/showthread.php?t=55538
Posted on EAB also