Amiga.org

Amiga computer related discussion => General chat about Amiga topics => Topic started by: chusete on November 14, 2010, 07:46:02 PM

Title: How to automount HDs with Cyberstorm
Post by: chusete on November 14, 2010, 07:46:02 PM

Hello amigans...

I haven't experience with SCSI.

I have a CyberStorm 060/PPC and I want to install a SCSI HD.

Using "Unit Control" (a Phase5 soft) I can see the HD:

Board 0 Unit 15 Lun 0 ST380013 3AS 8.12

With the software SCSICONFIG, I can create partitions, set the boot partiton, etc ...   I can't see the SCSI HD with hdtoolbox.

The problem is:  Now I must boot the amiga with an IDE HD, then use Unit Control and mount the SCSI HD manually.

I want to boot from the SCSI HD.  What I'm doing wrong?

Thank you

Title: Re: How to automount HDs with Cyberstorm
Post by: drbrain on November 14, 2010, 07:58:13 PM

The CSPPC uses "cybppc.device" for the SCSI.
Force, or select (depending on hdtoolbox version) that device and it should show up.

Also check the SCSI-settings in the bootmenu by pressing "ESC" after a softreset. Maybe force "automount"?

Title: Re: How to automount HDs with Cyberstorm
Post by: chusete on November 14, 2010, 08:03:49 PM

In the CyberStorm's boot menu I can select the unit 15, but not the LUN0, the options are:  NO-LUNs , LUN1, LUN2... etc and my HD is LUN0.

I'll try with cybppc.device in HDTOOLBOX.

Title: Re: How to automount HDs with Cyberstorm
Post by: Tension on November 14, 2010, 08:11:10 PM

Try changing the unit of the drive to 6

Title: Re: How to automount HDs with Cyberstorm
Post by: chusete on November 14, 2010, 08:52:49 PM

It works!

Now is set as Unit 6 - LUN 1...   the real LUN is 0, but setting it as LUN 1 in the boot menu, works.

What a difference!  now my Amiga flies!

Thank you Tension