Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: atom-ant on November 13, 2010, 05:28:48 PM

Title: Hard Drive
Post by: atom-ant on November 13, 2010, 05:28:48 PM

I have just fitted a 1TB hard drive to my AmigaOS 4.1 SamFlex440ep I have mounted the disk.have four partitions, and  I can see all the partitions but when I reboot they are not there. Do I have to add anything in the startup-sequence?
Thanks

Title: Re: Hard Drive
Post by: Franko on November 13, 2010, 05:37:13 PM

While I don't have OS4.1, when you partition a drive for the first time there is usually a button/option to click that's called save or write changes to drive that you should click in order to write the info to the drives RDB. Probably too obvious an answer but it's the best I can come up with , sorry... :(

Title: Re: Hard Drive
Post by: orb85750 on November 13, 2010, 07:42:22 PM

I hate to answer your question with a question, but does Hyperion offer support for their OS 4.1 software?

Title: Re: Hard Drive
Post by: atom-ant on November 13, 2010, 08:05:39 PM

HI
I have done it all drives shown on WB.

Title: Re: Hard Drive
Post by: atom-ant on November 13, 2010, 08:06:13 PM

HI
I have done it all drives shown on WB.

Title: Re: Hard Drive
Post by: Varthall on November 13, 2010, 10:35:29 PM

Quote from: atom-ant;591487

I have just fitted a 1TB hard drive to my AmigaOS 4.1 SamFlex440ep I have mounted the disk.have four partitions, and  I can see all the partitions but when I reboot they are not there. Do I have to add anything in the startup-sequence?
Thanks

Does UBoot recognize the drive? Is that drive the only one you have in your system, or are you booting from another hard drive and you're trying to see them in WB (after a reboot)?

Varthall