Amiga.org
Amiga computer related discussion => Amiga Software Issues and Discussion => Topic started by: actung_bab on October 01, 2010, 09:20:52 AM
-
hi setting up or more to point trying to set up telster.device with my cnet amiga bbs software
just few qwestions bear with me am newbie on the telnet thing.
l joined dyndns.org midnight-blue.dyndns.org do l need to run some sort update program
as my ip whould be dynamic
2 my router is configured to be 192.168.1.1 if l set up static ip of 192.168.1.6 on
my amiga 1200 through miami dx then port forward my router to this ip
in my dynalink router got pre configered drop down box setting for dyndns.org
thanks in advance
ps to test whould l have to go to internet cafe as locally it whouldint work to connect to my amiga
-
Hello!
With Dyndns you can just use their web interface and update your IP whenever you need to. I use their update client on my iMac and it does it for me. It doesn't matter what machine it runs on inside your lan.
To test your BBS internally just telnet in to the LAN IP instead of the Dyndns IP from another system. This needs to work (obviously) before messing with the NAT.
Yes the port forwarding is done on your router, just forward telnet to the IP of your Amiga and you should be good.
-
thanks buddy
-
just one more qwestion on the dyndns site under my services its got 3 options
Host with IP address [?]
WebHop Redirect [?]
Offline Hostname [?]
l got top one slected is this correct
-
l type in my routers ip adress and just get the adsl router answer l selcted the ofine mode on dyddns and says my service is offline
not in dns
-
l type in my routers ip adress and just get the adsl router answer l selcted the ofine mode on dyddns and says my service is offline
not in dns
When troubleshooting your router, let's just keep DYNDNS out of the picture for now. Work on DYNDNS after you have it all set up.
With that said, you should be able to get your public IP address from the router itself or from a page like Whatsmyip.org (http://www.whatsmyip.org/)
How did trying to connect to the BBS from your LAN go with the internal address go?
Test Flow Chart...
- Can you connect to your BBS from another system on the LAN using the IP Address of the Amiga?
- Can you connect to your BBS from the internet using your public IP?
- After setting up DYNDNS.ORG, does pinging your new domain return the public IP of your router?
Good luck!
-
sorry for taking so long
so far when try o connect with my amiga bbs over the lan
type in hyper terminal 192.168.1.9 the static adress l added to miami dx
t connects and just has blank screen nothing happens but stays connected
until l shut it down
l since got telnetd.device into my bbs modem settings get the same thing
its between the miami dx and my cnet 4 software
ive installed Amitcp 4 demoin the same dir as miami and added the telnetd.cofig file
into amitcp/db folder also in miami settigns data base ident added this
service socket protcol wait server name
telnet stream tcp nowait external AmiTCP:serv/telserd
since changng from telser.device to talnetd.device havent changed these miami settigns
l also tryed dos in the protcol settings too
l intalled
-
I can give you a copy of my versions of any files you need although they may be different as I am using Ami-Express and not C-net. Let me know.
-
thanks that be great mate loged into your bbs just so get my head around this
l changed my router to forward telent to my amiga ip adress last night
have my nephew here playing ureal tourment so to wait to see it works
last effort said acess was not auturised so guess make progress
-
Hyperterm is crap for telnet.
You would be better to use Syncterm as it supports telnet, ansi etc... for bbs use.
As has been said before, you need to forward the telnet port (23) in the router/adsl modem to the ip address of your amiga.
-
yes done that know just having alot issues getting my amiga hardware to work
well my hard drives got damage so process installing wb on cf drive but know got
faulty wb install disk oh my god this it very trying got dms file of it got get that written
to good floppy disk which l have very few of.
then there family so sometimes take alot patienceand time to get simplest task done
-
Actung:
You might want to consider a package like ClassicWB (http://classicwb.abime.net/) as trying to get anywhere from stock workbench disks is a real pain. If you can get that running, I can help you with your Ami-TCP / Miami setup or whatever.
What network card are you using?
-
Actung:
You might want to consider a package like ClassicWB (http://classicwb.abime.net/) as trying to get anywhere from stock workbench disks is a real pain. If you can get that running, I can help you with your Ami-TCP / Miami setup or whatever.
What network card are you using?
thanks got the bbs loging in from another pc using my local ip adress
so thats cool .
when ping my dyndns.org name l just get the ip of my local static amiga adress
got the wb discs working had dms someone sent me years ago was sitting yahoo mail
phew
thnaks for kind help just got get the web part sorted what the adress of bbs serve
cant seem get this dyndns site cant get my head around how to set it up
they dont seem have bbs mentioned there only remote mail etc remote desktop
-
changed setting int he router had static adress from my dyndns routed to my amiga 1200 ip adress doh... so pings know so assume it work got get someone to try please ....
http://telnet://midnight-blue.dyndns.org
-
Your running:
Cnet Pro 4.60 (17.8.98).
I *hate* how cnet does things... You can kill my login though, But it works...
-
Congratulations on getting it running!
-
Hello, just to let you know that I also have my BBS up and running and currently testing once again. Telnet to: necrobbs.dyndns.org Thanks. :)
-
Hello, just to let you know that I also have my BBS up and running and currently testing once again. Telnet to: necrobbs.dyndns.org Thanks. :)
It is down at the moment.. What bbs software are you running?
-
Dmaster, the DYNDNS doesn't seem to work like it did when you gave me the IP. Douple check your settings. Its good to see two more CNet Amiga Pro boards up!
-
thanks man your my first caller appriecate it
-
thanks well having people like you re doing there bbs gives us food for thought
love your banner by the way ur got good talent there
-
just quick qwestion most amiga baords at the time ran software called Ecessior oh crap l cant spell it but hope you understand . funny thing u never hear anything about it
best freind ran it looked nice . cdrom support was better than cnet .
though did say alot more script based but look fantasic
-
http://www.facebook.com/#!/pages/Reign-of-Fire-BBS/133595380013409
-
Hey, I think I got my telnet working for the BBS the correct way now. Please telnet to: necrobbs.dyndns.org and help test it please. Thanks. Hope to see you there.