Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: Amigo1 on September 30, 2010, 10:02:12 AM

Title: The Real HD-Fix
Post by: Amigo1 on September 30, 2010, 10:02:12 AM

Hello fellow Amigans,

I own a "The Real HD-Fix" floppy controller engeneered by T.Hirsch.

As can be read here on the bboah website (http://www.amiga-resistance.info/bboahfaq/index.php?action=artikel&cat=54&id=2280&artlang=de), there appear to be 2 or more versions of this small board.
I happend to have the version which has a small chip clip which should be attached to the CIA located at U7 in A1200s. The plate is green instead of red, and it's the version for the A1200 made by Amiga Technologies.

Now, the bad part is, I accidentally breakaway the small cable off the chip clip and can't see on which pin it was connected.

Is there somebody out there who can provide a picture or tell me on which pin on the chip clip I have to solder the small wire?

Thanks in advance

Title: Re: The Real HD-Fix
Post by: ChaosLord on September 30, 2010, 05:11:56 PM

Thomas Hirsch is currently designing the Natami (think Amiga 5000).

You should post your message over at  http://www.natami.net (http://www.natami.net/)

Tell them some crazy guy from Team Chaos sent you ;)

Title: Re: The Real HD-Fix
Post by: Amigo1 on September 30, 2010, 10:19:49 PM

Thanx a lot!! :-))

Title: Re: The Real HD-Fix
Post by: Joseamiga on October 04, 2010, 06:04:12 PM

If you want to use real Pc disk drives with your A500 or A600 or... please, read something about this in the forum. There is an interesting article  called The final hack for 1,44mg 100% functional (http://www.amiga.org/forums/showthread.php?t=54685). Greetings.

Title: Re: The Real HD-Fix
Post by: Amigo1 on October 06, 2010, 08:13:05 AM

Thanks, but I need a HD-floppy. If I can't repair the one I mentioned before, I will come back to you..

greetings to spain! :-)