Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: Xanxi on September 27, 2010, 06:37:03 PM

Title: Help for MicroniK Scandex required
Post by: Xanxi on September 27, 2010, 06:37:03 PM

Hi.

In order to get my Micronik Scandex fixed, i need either the schematics of this device or a picture of an open Scandex to see how to solder the wires to the DB23 connector.

It looks like this:

(http://amiga.resource.cx/photos/photos/scandex.jpg)

Any help would be greatly appreciated.

Thanks.

Title: Re: Help for MicroniK Scandex required
Post by: Xanxi on September 28, 2010, 07:36:28 AM

Got this pic, that i share if anyone needs this too, but i still could use a closer shot.


(http://free0.hiboox.com/images/3910/dcc6a56b71635e7b3cd40e338c2f5d83.jpg)

Title: Re: Help for MicroniK Scandex required
Post by: Xanxi on September 28, 2010, 09:29:04 AM

Finally this inside picture is not the same than mine. There are probably several revisions.
Still need your help :-)