Amiga.org

The "Not Quite Amiga but still computer related category" => Amiga Emulation => Topic started by: blakespot on August 20, 2010, 01:05:14 PM

Title: How to modify my OS39 Emergency Disk?
Post by: blakespot on August 20, 2010, 01:05:14 PM

Hey there.

I installed OS 3.9 on my A1200 060 and generated an Emergency disk.  I am now trying to get OS 3.9 going under WinUAE after my A1200 has gone a little flaky.  The emergency disk, which I made into an ADF, seems to be looking for the 1230scsi.device from my Blizzard setup on the real A1200.  How can I modify this disk so that it will look for uaescsi.device, allowing me to use it under WinUAE?

I don't see any specific indication of 1230scsi.device in the floppy's startup scripts...

Thanks.  At a roadblock here, it seems.




blakespot

Title: Re: How to modify my OS39 Emergency Disk?
Post by: Thomas on August 20, 2010, 01:15:02 PM

Edit df0:devs/dosdrivers/EMERGENCY_CD.

Title: Re: How to modify my OS39 Emergency Disk?
Post by: Golem!dk on August 20, 2010, 01:15:09 PM

Nevermind.. see Thomas' reply :)

Title: Re: How to modify my OS39 Emergency Disk?
Post by: blakespot on August 20, 2010, 02:55:49 PM

Thanks.  What SCSI unit # is the CD drive that uae presents?

Thanks.



bp

Title: Re: How to modify my OS39 Emergency Disk?
Post by: Thomas on August 20, 2010, 03:00:33 PM

Depends on how many drives you have and in which one the CD is. The first one is 0. If you have multiple, check winuaelog.txt or just try 0, 1, ...