Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: XDelusion on July 08, 2010, 07:20:30 PM

Title: Apollo 060 issues
Post by: XDelusion on July 08, 2010, 07:20:30 PM

I installed a 50Mhz Apollo 060 and now when ever I try to click on any of my prefs, it tells me to wait for disc activity to finish. Is there some sort of special libs or something I need to install?

Thankx!

Title: Re: Apollo 060 issues
Post by: tone007 on July 08, 2010, 07:25:05 PM

Dropping the libraries in the first zipfile on http://phase5.a1k.org/ into your Libs: is a good start.

Title: Re: Apollo 060 issues
Post by: cv643d on July 08, 2010, 09:29:35 PM

If that does not cure problem perhaps you need to do some small hw fixes to your motherboard. Before I did them to my 1d4 mobo it was very unstable. Now its rock solid and fast with the Apollo 1260.

Title: Re: Apollo 060 issues
Post by: XDelusion on July 09, 2010, 08:48:49 PM

From what I understand, my 1200 is supposed to be set to go for upgrades.

I'll take these libs home here in a bit and test them.

Title: Re: Apollo 060 issues
Post by: XDelusion on July 10, 2010, 03:15:33 AM

Seems to have worked, now do I need to use the 040 libs as well?

Title: Re: Apollo 060 issues
Post by: tone007 on July 10, 2010, 11:02:44 AM

You should unzip the whole zipfile into Libs:, it contains the 060 libs and a dummy 040 lib for software that looks specifically for that one.