Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: mikefr24 on June 26, 2010, 05:27:12 PM
-
The 1084S monitor will work with a PAL or NTSC Amiga 1200 if you use the RGB cable correct? It is only the RF connection that is different?
-
The 1084S monitor will work with a PAL or NTSC Amiga 1200 if you use the RGB cable correct?
100% Correct.
-
It may require a bit of adjustment of the vertical hold knob though - should be a breeze. ;)
-
It may require a bit of adjustment of the vertical hold knob though - should be a breeze. ;)
The 1084 has no externally accessible vertical hold knob, nor does it have an RF input. It will sync to 50/60Hz automatically without any knob twiddling.
But the composite/LCA connectors only support PAL or NTSC depending on where the monitor was sold.
-
I was having trouble displaying PAL games on my old NTSC A2000, but I dunno if there was something else wrong. Most people say it works fine
-
Thanks guys. I ordered a A1200 from Amigakit because I was tired of waiting for a nice one on Ebay. The price was not much different and I get a nice clean unit. I have several 1084's laying around and was pretty sure they would work with a PAL system.
Thanks Again!
Mike