Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: Cosmos Amiga on June 01, 2010, 08:55:13 PM
-
I have added gfx cards (only Z2 and Z3 for now) detection at boot.
But I need all the IDs. I have these :
CyberVision 64 (8512/34) => CyberGraphX (checked by Cosmos)
CyberVision 64/3D Z2 (8512/67) => CyberGraphX (checked by Cosmos)
CyberVision 64/3D Z3 (8512/50) => CyberGraphX
Domino Z2 (2162/01/02) => Picasso96
Domino Z3 (2167/01/02) => Picasso96
Merlin Z2 (2117/3/4/201) => Picasso96 (checked by Zac67)
Merlin Z3 (2117/3/4/201) => Picasso96 (checked by Zac67)
Omnibus (2181/00) => Picasso96
Picasso 2 (2167/11/12/13) => CyberGraphX
Picasso 2+ (2167/11/12/13) => CyberGraphX
Picasso 4 Z2 (2167/21/22/23/24) => CyberGraphX (checked by CrashMidNick)
Picasso 4 Z3 (2167/24) => CyberGraphX (checked by LoadWB)
Piccolo SD64 Z2 (2195/10/11) => CyberGraphX
Piccolo SD64 Z3 (2195/10/11) => CyberGraphX (checked by Protek)
Piccolo Z2 (2195/05/06) => CyberGraphX
Piccolo Z3 (????/??) => CyberGraphX
Rainbow 2 (2145/32) => ?
Rainbow 3 (2145/33) => CyberGraphX
Retina Z2 (18260/6) => ? (checked by Gulliver)
Retina BLT Z3 (18260/16) => CyberGraphX (checked by Gulliver)
Spectrum Z2 (2193/01/02) => CyberGraphX (checked by Matt_H)
Spectrum Z3 (2193/01/02) => CyberGraphX (checked by Matt_H)
Wildfire Inferno (????/??) => CyberGraphX
WinUAE (2011/02) => Picasso96 (checked by Cosmos)
Please, give me the Manufacturer and Product ID (go in the early-startup/Expansion Board Diagnostic) for all these cards. I'll update this post.
-
The Retina Z2 and the Rainbow 2 are working with CyberGraphX 4 ?
-
Retina Z2 not, about Rainbow 2 I don't know.
-
And the Retina Z2 is working with Picasso96 ?
-
Got an X-Pert Merlin 4 MB here (Z3 mode):
2117/4 (64 KB register part)
2117/3 (4 MB buffer part)
-
Just checked - Spectrum in Z3 mode uses the same IDs as Z2 mode.
-
Thanks !
-
And the Retina Z2 is working with Picasso96 ?
Here you got everything: http://amiga.resource.cx/exp/retina + ID for Retina (and other stuff). ;)
-
It seems you have got everything except the id’s. I too have been in the exact same situation before. Fortunately I got all the id’s pretty fast as a friend of mine helped me. However I wish I could help you but it seems that there is lot of gfx cards here and to name all of their id’s is not that easy as you might expect. The best bet would be to go for what radzik has said. Check that link and you may get some idea
Business Process Automation (http://www.inin.com/ProductSolutions/Pages/CBPA.aspx)
-
Yes, I still need :
Piccolo Z3 (????/??)
Piccolo SD64 Z3 (????/??)
Wildfire Inferno (????/??)
-
P4/Z3 uses 2167/24 in my system. I use P96.
-
Confirmed, same here. Btw, my Prometheus/Voodoo3 combo is 44359/1 ;)
-
Wildfire Inferno (????/??)
Re Amiga resource: 2012 / 23,255
-
>Re Amiga resource: 2012 / 23,255
http://amiga.resource.cx/exp/inferno
Where ???
>Prometheus/Voodoo3 combo is 44359/1
PCI cards for the beta 10 !
-
Here : http://amiga.resource.cx/exp/wildfire it's the accelerators card, not the gfx card !
-
Inferno has a local bus connection via Wildfire I think - just like CybervisionPPC has sort of PCI into CSPPC so there's only the accelerator ID visible.
-
I use a Picasso II with Picasso 96 software
-
Who have a Rainbow 2 ?
Working with P96 and/or Cgx 4 ?
Same questions with the Retina Z2 !
-
Wasn't Retina Z2 just EGS and Retina software capable?
-
There was once a beta CGX driver for it.
-
There was once a beta CGX driver for it.
A beta CGX driver for the Retina? Can me anyone send the driver?
-
I am sorry I dont have the driver. But, I remember a couple of years ago this subject was brought to light, and I believe people shared that driver. I cant remeber if that happened here or at EAB.
Have a good hunt ;)
-
Sorry cannot help you with this (I only have CV64), but I cannot help my curiosity:
(I hope you don't mind me asking) What are you going to do with this information? Are you developing some sort of new hardware?
-
So, anyone, what is this for? I'm asking again as everybody else seems to know what this is about...
(thanks in advance for feeding my curiosity)
-
It's for graphics.library updates.
-
It's for graphics.library updates.
Yes, certainly, but what use is this information?
-
Yes, certainly, but what use is this information?
It's interesting for some.
personally, I'd love to have an unabridged listing of Autoconfig Manufacturer/Product/revision codes, not just for graphics or anything in particular, but for any and all Zorro/Accelerator/whatever cards for Amigas that have Autoconfig IDs. Which can be kept up to date, add new manufacturers if anyone is crazy enough to want one without conflicting with others, and easily parsed by code. I'm suprised I haven't been able to find a singular list.
As such, I've started making my own list at
http://amigabillprojects.wikispaces.com/Amiga+Autoconfig+IDs
Please help get it filled in.
-
In the early-stratup, the numbers are not in hex... So, please, choose the same dec in your listing...