Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: bbond007 on May 31, 2010, 08:31:05 PM

Title: A1200 030 Ibrowse & DirOpus4 Guru #8000000D
Post by: bbond007 on May 31, 2010, 08:31:05 PM

Hi

I'm trying to get the remaining bugs worked out of my new A1200.

I have installed ClassicWB ADV on my 4gb CF card.

Most applications are working fine, however Ibrowse and DirOpus4 seem to both crash with GURU #8000000D

I have a Typhoon MK2 030/40 with FPU & 32mb RAM.

I have a subway USB adapter, but the errors occur even when the software for that is not loaded.

I tried increasing the stack.

Any Ideas?

Thanks!

-nate

Title: Re: A1200 030 Ibrowse & DirOpus4 Guru #8000000D
Post by: bbond007 on May 31, 2010, 08:41:01 PM

"Coprocessor Protocol Violation" error (GURU 8000000D).

I also get the same error with DirOpus4 if I boot of my Workbench floppy.

Also, the machine freezes with SysSpeed when I run the CPU/FPU test.

I have no idea what to do :(

Title: Re: A1200 030 Ibrowse & DirOpus4 Guru #8000000D
Post by: amiga1260 on May 31, 2010, 09:02:51 PM

Try to change the Maxtransfer rate to 00x1fe00 with HDToolbox. This will get rid of your problem.

Title: Re: A1200 030 Ibrowse & DirOpus4 Guru #8000000D
Post by: bbond007 on May 31, 2010, 09:16:35 PM

Quote from: amiga1260;562253

Try to change the Maxtransfer rate to 00x1fe00 with HDToolbox. This will get rid of your problem.

I checked my MaxTransfer and its set to 0x1fe00 on all partitions.

Any other ideas?

Thanks,

-nate

Title: Re: A1200 030 Ibrowse & DirOpus4 Guru #8000000D
Post by: amiga1260 on May 31, 2010, 09:25:00 PM

What happend when you copy this program to your RAM disk and run the program?

Title: Re: A1200 030 Ibrowse & DirOpus4 Guru #8000000D
Post by: bbond007 on May 31, 2010, 09:36:36 PM

Quote from: amiga1260;562259

What happend when you copy this program to your RAM disk and run the program?

if I copy DirOpus4 to RAM: I still get error #8000000D when I run it.

Thanks,

Nate

Title: Re: A1200 030 Ibrowse & DirOpus4 Guru #8000000D
Post by: bbond007 on May 31, 2010, 11:13:20 PM

Quote from: amiga1260;562259

What happend when you copy this program to your RAM disk and run the program?

Actually,

I can run SysSpeed (cpu/fpu test) and DirOpus4 after the computer has been off and don't get #8000000B(for a while), but once I get it I continue to get it.

I can boot off of my original Workbench floppy, try and run DirOpus4 and still get it - until I let the computer cool off again.

Most stuff runs really reliably however long the machine has been on. Just not the stuff that causes #8000000D...

Title: Re: A1200 030 Ibrowse & DirOpus4 Guru #8000000D
Post by: futaura on May 31, 2010, 11:22:19 PM

Don't know about DOpus, but which CPU option did you choose when installing IBrowse?  Sounds like you maybe have the wrong build installed.

Title: Re: A1200 030 Ibrowse & DirOpus4 Guru #8000000D
Post by: bbond007 on May 31, 2010, 11:52:05 PM

Quote from: futaura;562273

Don't know about DOpus, but which CPU option did you choose when installing IBrowse?  Sounds like you maybe have the wrong build installed.

I doubt I installed the wrong version :) but you gave me an idea.

I reinstalled and just picked the 020 without FPU and it actually seems to work. I'll try the FPU version and see if I encounter the error again.

I'm thinking I have a bad FPU chip.

Title: Re: A1200 030 Ibrowse & DirOpus4 Guru #8000000D
Post by: bbond007 on June 01, 2010, 12:30:05 AM

Quote from: bbond007;562277

I reinstalled and just picked the 020 without FPU and it actually seems to work. I'll try the FPU version and see if I encounter the error again.

Update:

the 020 version works well, the 020+FPU version brings my old nemesis #8000000D.