Amiga.org
Amiga computer related discussion => Amiga Software Issues and Discussion => Topic started by: Karlos on April 25, 2010, 07:20:26 PM
-
A strange thing happened today.
I was writing a file to a partition that spans the 8GB boundary of my main A1200's hard disk and got "Error 45".
The fact that the partition was on that boundary piqued my curiosity. When I checked the version of my scsi.device, it was 40.12 from way back when.
I haven't seen a version that old since before I installed OS3.5 :-o
The thing is, I'm currently using OS3.9 bb2 on the machine in question. I don't recall it ever failing to load the updated ROM modules before. Now, I do know that the old scsi.device just can't go past 8GB and that's one of the reasons I went for OS3.5 (and subsequently 3.9) in the first place.
Anybody know why it's failing to load? I checked the startup-sequence and none of the clauses that usually cause setpatch to skip scsi.device updates seem to be true.
The HD is >8GB and attached via the motherboard. Remaining machine specs are:
A1200 with KS3.1 roms,
CPU: 68040@25MHz / 603e @ 240MHz (BPPC)
RAM: 256MB 60ns.
GFX: BVision
-
You may wanna check if the nsdpatch.cfg file isn't corrupted in any way. And check that the romupdate is also in one piece. You could try to swap them with older versions.
-
Very strange. Are your other updated modules working (Workbench->About should show 3.9 ROM and v45)?
-
Very strange. Are your other updated modules working (Workbench->About should show 3.9 ROM and v45)?
It gets stranger. I've booted OS3.5 from cold now and it has no issues. I then warm rebooted into 3.9bb2 which now works but is using the already installed 3.5 rom updates.
If I cold boot 3.9bb2, no rom updates are loaded. It's pretty bizzare.
-
Hm, looks like you have the nsdpatch.cfg (or some other file) from 3.5, instead of the 3.9 one.
You wrote that you where writing something when you got the crash. Maybe some file got overwritten.
I guess everthing worked before. Changed something recently ?!
-
My OS3.5 installation has the following rom update file in DEVS:
AmigaOS ROM Update
102000 bytes, version 44.6 (21/12/1999)
My OS3.9bb2 installation has the following rom update files in DEVS:
AmigaOS ROM Update.old
127956 bytes, version 44.26 (17/09/2000)
AmigaOS ROM Update.BB39-2
321768 bytes, version 44.57 (25/02/2002)
AmigaOS ROM Update
321768 bytes, version 44.57 (25/02/2002)
Not entirely sure why I have 2 copies there but I am assuming that the only one that would be used is the one labelled "AmigaOS ROM Update" in any event.
-
Hm, looks like you have the nsdpatch.cfg (or some other file) from 3.5, instead of the 3.9 one.
That'd be odd, since 39 was installed on a clean partition. I wonder if it's been overwritten? You can do strange things when you are half asleep.
-
I guess everthing worked before. Changed something recently ?!
It did. A few weeks ago, I recall restoring some system files from a backup. I wonder if I got the wrong ones?
For all I know, this particular problem could have been waiting since then :)
-
I think I've encountered your problem before, but I don't know how I solved it.
If you warm reboot and it accepts OS3.9bb2 romupdate, the romupdate should be fine. Else it wouldn't accept it.
Plz check with minimal startup and just type 'setpatch' to see if it works.