Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: Gulliver on March 18, 2010, 10:43:21 PM

Title: Problem with IDE cables and interface
Post by: Gulliver on March 18, 2010, 10:43:21 PM

I have found that when trying to connect my DCE bufered IDE interface, I cannot do it because the female IDE conector at the cable, has one pin hole covered.

So I guess I need to bend a pin, am I right? Which one should I bend?

Please have a look at the picture, it is self explanatory.

Title: Re: Problem with IDE cables and interface
Post by: alexh on March 18, 2010, 10:46:06 PM

Use a different non keyed cable or remove the key if possible then no bending required and if it doesn't work just swap the cable round.

Title: Re: Problem with IDE cables and interface
Post by: Gulliver on March 18, 2010, 10:59:58 PM

The cable is keyed on both sides. I will try to see if I can remove the key.