Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: shufflemoomin on January 27, 2010, 02:25:31 PM
-
Hi All,
I'm trying to install workbench 3.0 on my A1200 with newly fitted HDD. I can run the install program and I get to the point where it asks me to insert the amiga workbench disk in any floppy drive. I put the correct disk and in it immediately flashes the screen and says 'Please insert the correct disk to continue'. I have inserted the correct disk which I know works. The thing that's worrying me is that the drive makes no attempt to read. The screen just flashes instantly and asks me to insert the correct disk. I assume the mechanism that tells the drive that a disk has been inserted/removed isn't working.
Does sound like the case to the more knowledgeable here? Is there anything I can besides buy a replacement drive?
Shufflemoomin
-
You could try the command diskchange and see if it works then.
I think it's syntax is diskchange df0:
-
It's been years and years since I was an Amiga user, and even then it was only a games machine. Can you give me a run through of where I enter this command? I assume there's a shell somewhere?
Shufflemoomin
-
It might be the install script. I get that problem with some games.
Also check the name of the hard drive and check the startup-sequence on the floppy. It might be refering to the name of the hard drive (or floppy) and not HD0:/DF0: like it should.
-
I managed to input the command as recommended, but it says unknown command. Any know the correct syntax?
Fanscale, your ideas sound interesting. Can you please give a little more information on where and how I check this? What I should be looking for, etc?
Thanks guys
Shufflemoomin
-
Oh, I think it comes with Workbench but i'm not sure which disk it's on.
-
Hi All,
I'm trying to install workbench 3.0 on my A1200 with newly fitted HDD. I can run the install program and I get to the point where it asks me to insert the amiga workbench disk in any floppy drive. I put the correct disk and in it immediately flashes the screen and says 'Please insert the correct disk to continue'. I have inserted the correct disk which I know works. The thing that's worrying me is that the drive makes no attempt to read. The screen just flashes instantly and asks me to insert the correct disk. I assume the mechanism that tells the drive that a disk has been inserted/removed isn't working.
Does sound like the case to the more knowledgeable here? Is there anything I can besides buy a replacement drive?
Shufflemoomin
Are you using the floppy to boot with? Sounds like a strange problem. Also, you have to boot from the Install 3.0 disk if you want to install workbench on a new HDD.
Can you hear the trademark Amiga floppy drive "click" every few seconds? (Only heard with no disk in drive)