Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: guest7187 on January 12, 2010, 07:31:33 AM
-
Ok, so I am having a problem with my A4000T and OS3.9 if I try to use the drivers from this web page http://phase5.a1k.org/
If I try to use the 4 libraries from the Systemlibrarys for 68040/68060 Systems archive, particularly the 68060 library version 46.15, the system boots, reboots once (as it should for the update rom) and then hangs indefinitely with no picture (black screen). If I replace the 68060 library with version 46.7 then my miggy boots up normally.
I have read some of the threads in here regarding this and some people have it working and some don't.
Thanks for any insight.
Rick
---
A4000T CSPPC/CVPPC OS3.9 & Lots o' Ram
HydraNet 3 w/ MiamiDX, Delfina Lite w/AHI
Catweasel ZII "S-Class", Video Magician
-
The 68060 libraries I'm using with my A4000T + CSmk2 are here (http://amiga.serveftp.net/Temp/68060_libs.lha). Works fine with OS3.9, no problems. Can't comment on the PPC libraries. Might be an idea to disable them until the 68k side is working happily.
-
Try to use MuLib/MuTools, it is much better for stable system working. Very important is to do good configuration. Buildmmuconfig.rx from MuLib archive will help you to build right MMU table for your hardware configuration. I you have trouble, mail me I'll try to help You.
-
Thanks for the suggestions. My miggy is running stable with the 46.7 version of the 060 library. I was just curious if anyone knew why the 46.15 version did not work.