Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: jackiabu on December 27, 2009, 06:41:19 PM
-
HI
I AM JUST NEW HERE IN THIS FORUM!
I HAVE A PROBLEM I TRY TO CONNECT THE TANDEM TO MY A4000T,IN ZORRO 2. I BOOT MY WB 3.1 BUT WHEN I TRY TO INSTALL THE SOFTWARE (TANDEM PLUS V3.O) THE AMIGA STRAT SCAN CD IDE... AND IN THE END NOT RECOGNIZE THE CD. ALL SO I TRY TO CHANGE THE CD TO OTHER MODEL, BUT AGAIN NOT MOUNT MY CD?!!!
I AM STUCK PLEASE CAN ANY ONE HELP ME?:angry:
P.S.
I ALL SO HAVE HUGE COLLECTION OF STUFF OF AMIGA!!!:)
http://amiga.zanzuria.com/mlai.htm
THIS SITE IS IN HEBREW.BUT THE HARDWARE IN ENGLISH
-
dod you connect your cd-rom to first (IDE/ATA) port, coz cdrom port supports only obsolete drives.
from manual:
The CD-ROM connector is capable to operate with the following drives from Mitsumi:
• LU-005S single speed CD-ROM drive
• FX-001S single speed CD- ROM drive
• FX-001D double speed CD-ROM drive
-
dod you connect your cd-rom to first (IDE/ATA) port, coz cdrom port supports only obsolete drives.
from manual:
The CD-ROM connector is capable to operate with the following drives from Mitsumi:
• LU-005S single speed CD-ROM drive
• FX-001S single speed CD- ROM drive
• FX-001D double speed CD-ROM drive
HI
YES I CONNECT THE CD ROM TO IDE/ATA PORT. AND MY CD ROM IS MITSUMI FX400D, BEFORE I FORMAT MY WB IT WAS WORK FINE BUT NOW NOTHING,ANYWAY I THINK IN THE PAST I CONNECT TO TANDEM
SOME OTHER MODEL OF CD ROM AND ALLSO IT WORK FINE.
IS MASTER OR SLAVE IN THE CD ROM NEED?
:laughing:
-
And since your on it, high time to replace your caps-lock key ....
Writing in caps = shouting = rude
-
Try selecting tandem_atapi.device in the list, instead of letting the program scan for the CD drive, and see if it makes a difference.
-
With my TANDEM atapi card on A2000 or A3000, the CDROM icon appears a few second after workbench ends his work. I've a PLEXTOR PLEXWRITER 48/24/48A and it works fine.
-
you can also try to use oktapussy driver from there
http://amiga.resource.cx/exp/search.pl?product=tandem&company=
-
Hey your site doesn't work. When i click on a link, it goes to URL not found:(
-
Hey your site doesn't work. When i click on a link, it goes to URL not found:(
Works fine: http://amiga.resource.cx/exp/tandem
@jackiabu: for the device: use "tandemat.device" (link above: install disk).
-
Hey your site doesn't work. When i click on a link, it goes to URL not found:(
Make no sense, but try: http://amiga.zanzuria.com/
-
Make no sense, but try: http://amiga.zanzuria.com/
Okay, tried that. I clicked on the 1200 card, then clicked on several active links including the toaster 4000 hardware, but I get error 404
-
Not Found
The requested URL /toaster2000.html was not found on this server.
all the links pointing to
http://www.amiga-hardware.com/
are broken
-
Okay, tried that. I clicked on the 1200 card, then clicked on several active links including the toaster 4000 hardware, but I get error 404
They are only links to the old Big Book of Amiga Hardware, Its better to go to the newer site :- http://hardware.amigafuture.de/
Gaz
-
Hi,
I used a Tandem controler in my A2000 with an IDE CDRW on the ATA/IDE Port, after that I installed Tandem drivers and IDEFIX'97.
-
Okay, tried that. I clicked on the 1200 card, then clicked on several active links including the toaster 4000 hardware, but I get error 404
Maybe i dont clear my self well. this is my list of my amiga stuff, the link is only to show you the hardware. i have not find the time to picture all my stuff my self. so there is list of some hardware that i collect over the year
from other people in isreal, all so there is an orignal software for amiga some of them brand new. so again iam sory the site is in hebrew.
but again this is just list of my stuff in home,nothing else.:)
-
Hi,
I used a Tandem controler in my A2000 with an IDE CDRW on the ATA/IDE Port, after that I installed Tandem drivers and IDEFIX'97.
Well i try this all so but,again nothing happen the cd rom not mount.:hammer:
-
Some Cdrom are not fully amiga compatible, for ie a Samsung 52x CDRW can't be used on my 1200...
Try another one in MasterMode with a short "standard" IDE cable not the thin UltraATA ones.