Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: AlaskaCC on November 10, 2009, 11:11:11 PM

Title: A3000T SCSI Help Please
Post by: AlaskaCC on November 10, 2009, 11:11:11 PM

Hello,

I recently purchased a 3000T that has a Seagate ST15150N SCSI drive.  I have not been able to get the system to recognize it.  The jumper settings appear to be correct.  I would like to get it booted up so I can see the contents.  3.1 boot rom.  Any suggestions?

Clay
alaskacc

Title: Re: A3000T SCSI Help Please
Post by: dannyp1 on November 11, 2009, 01:34:07 AM

Have you run a program to scan your scsi chain to see if it shows up and what address it is?  Is there anything else on your scsi chain?  Are you using the A3000T's scsi?  Are you using an A3640?  What do you mean when you say the system won't recognize the HD?

Dan

Title: Re: A3000T SCSI Help Please
Post by: Tension on November 11, 2009, 01:37:40 AM

Termination, Termination, Termination.

Title: Re: A3000T SCSI Help Please
Post by: AlaskaCC on November 15, 2009, 05:22:23 AM

I changed a jumper on the drive to get termination power from the SCSI bus instead of the drive.  That was successful.  Thanks for your help.

Clay