Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: jonbyk on October 20, 2003, 09:25:21 PM
-
Installing new psu, it wouldn't light up. So plugged in elements one at a time. Something popped; there was a puff of smoke and my wonderful Amiga died. I have a Mediator Mirage and I might have bumped my Cybergraphx board so that it contacted my DKB 3128.
I can't fix it. I live in West Los Angeles. Anyone nearby that would like to give it a try for $?
Thanks,
Jon Byk :-(
-
Time to buy A1 or Pegasos2 :-)
-
Hooligan_DCS wrote:
Time to buy A1 or Pegasos2 :-)
Sad, but probably the only sensible course of action.
-
Nasty i feel sorry for you hope you can find another one . :-)
-
I'd look at it but I am in Florida.
Off the top of my head look at the back of the motherboard toward the rear of the case. The A3000 has tiny motherboard fuses that may have popped. They are small and look like resistors(blue IIRC). Look for anything burnt at all.
Does the power supply still spin? If nothing else A3000s go for cheap on eBay.
-
Thanks for the reply. I'll look. Have you thought of moving someplace warm and dry?
Jon Byk
-
RIP Miggy :-(
Edit: Actually maybe that's jumping the gun. Hope you get it fixed.
-
Send it to me, cards and all :-D :-D
I hope you can get it up and running. A3000 are easier to fix than some so there is hope. It could be the daughter card. the 3000 will not run without one. Check it for evidence of burn.
stew
-
bloodline wrote:
Quote:
Hooligan_DCS wrote:
Time to buy A1 or Pegasos2
Sad, but probably the only sensible course of action.
Wot? No Aros plug?