Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: MikePig on September 26, 2003, 10:55:55 PM

Title: Zorro 3 problem
Post by: MikePig on September 26, 2003, 10:55:55 PM

Hi

What can cause  Zorro3 cards not working in an A4000D although Zorro2 cards are working ?
buster 11 socketed

TIA

Michel

Title: Re: Zorro 3 problem
Post by: Markus_Bieler on September 27, 2003, 12:41:06 AM

1. Which card?

2. Change the slot

3 Bad card. I had once a DKB3128 with red startup-screen

Title: Re: Zorro 3 problem
Post by: duesi on September 27, 2003, 07:14:38 AM

I once had the same problem.
You have to put the ZorroIII cards before the ZorroII cards...that means the first Slot is that one nearest the RAM-Banks..

If only one ZorroIII card is installed and not recognized..then your Buster is probably faulty

Also make sure your cards are working :-)