Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: fiat1100d on April 30, 2009, 08:45:39 AM

Title: Full Motion Video module schematics?
Post by: fiat1100d on April 30, 2009, 08:45:39 AM

Hello!

Do the Full Motion Video schematics exist and are they available somewhere, if they do exist? I am looking for C-Cube CL450 pinout: I received a module where two pins were shorted (being bent a bit) and I need to know if it may have lead to the problems of this unit (greenish images).

Thank you!

Title: Re: Full Motion Video module schematics?
Post by: Chain on May 01, 2009, 06:36:25 PM

good luck to find a schematics. imho they dont exists anymore.
green tint can be also cap problem.
If you tell me which pins you need, i can measure it for ya on a good unit with a scope

ive repaired one unit today (78L05A dead, cap shorted) so let me know asap as i have it opened on a surgery table now..

Title: Re: Full Motion Video module schematics?
Post by: fiat1100d on May 03, 2009, 03:45:42 PM

Thanks for your reply.

Took a photo of the "shorted" pins, well they were actually very close together but not shorted at all... So will try to replace caps if necessary, but they don't seem to have leaked.

Title: Re: Full Motion Video module schematics?
Post by: thomas vivet on January 01, 2010, 02:18:57 PM

i need a 40.30 rom files for my Full motion card, for my cd 32 video game. Can you send me vivet.thomas@neuf.fr

thanks you

thomas vivet

Title: Re: Full Motion Video module schematics?
Post by: Cosmos Amiga on January 01, 2010, 04:03:59 PM

Green tint, but only on videos here... (v40.22)

New caps = always green...


any ideas to fix this ?

Title: Re: Full Motion Video module schematics?
Post by: Chain on January 01, 2010, 05:43:27 PM

did you replaced all caps in fideo output? not only ellyt caps, but also those ceramic ones, or at least check them if they are ok. if its working, but image has a tint then it must be problem with video out (something probably shorts red or blue video signal)

Title: Re: Full Motion Video module schematics?
Post by: Cosmos Amiga on January 01, 2010, 06:06:25 PM

All... Hum ok, not all, four 4.7uF are left... new soon, but used for the video output ?


And I have a pink tint on all CDs (not VCD) but ONLY on Workbench screens with the FMV in !

No pink without... Powersupply not enough with the FMV ?


And always green screen when I run video VCD...

My 40.22 version ?


Where to find the 40.30 ?

Title: Re: Full Motion Video module schematics?
Post by: Cosmos Amiga on January 02, 2010, 10:32:14 AM

Tried the 40.30...

Pink and green always here...

Title: Re: Full Motion Video module schematics?
Post by: Cosmos Amiga on January 06, 2010, 01:15:47 AM

I think it's my CD32 rev 4.1 (french mobo) who give me the pink and green tints...

How to fix for a rev 3 compatibility ?