Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: arnljot on January 11, 2009, 07:41:35 PM
-
Hi
Since my pc-uae to amiga via cf route has "died" I need some help.
How can I use the cd mount feature of my cybppc to move files from my pc to my amiga?
Can I just use my amiga 3.9 cd (I've had no luck so far), cd0 is visible in early startup, but when I try to access it in dos(cli) it says that it doesn't have any mounted volume.
Or do I need to burn an iso cd under windows with the needed amiga files?
-
arnljot wrote:
Hi
Since my pc-uae to amiga via cf route has "died" I need some help.
Not sure what you're referring to with "via cf route"...
arnljot wrote:
How can I use the cd mount feature of my cybppc to move files from my pc to my amiga?
I'm not sure if I fully understand you here - you want to transfer files between a PC and an Amiga by using "the cd mount feature"? How is that meant to work?
arnljot wrote:
Can I just use my amiga 3.9 cd (I've had no luck so far), cd0 is visible in early startup, but when I try to access it in dos(cli) it says that it doesn't have any mounted volume.
Errrrrmmmmmmm - why don't you boot from the HD?
Why don't you use a serial connection or parallell connection to transfer files between your systems?
Or in case you have expanded your Amiga not just with a CyberstormPPC, but with an Mediator PCI busboard and Voodoo graphics card, you can as well put a NIC into a PCI slot and connect the systems via ethernet and transfer your files that way (works perfectly here on my end).
arnljot wrote:
Or do I need to burn an iso cd under windows with the needed amiga files?
Of course you can as well burn the files you want to transfer on a CD on you WIntel machine and read it on the Miggy - but do you really want to burn a CD each time you want to transfer files to your Miggy?
:inquisitive:
-
My uae-cf route: I used to mount an rdb formatted cf, access it under UAE, and then put it in my amiga4000
cd mount:
The cyberstorm ppc can mount a CD0: which can be accessed by the amiga without any cdrom filesystem on disk (ready from boot, accessible in early startup)
vs 3.9 cd rom:
No, my problem is that my system is "clean" no installed software at all. My hd caught fire in 2008, and now my CF card. My HD caught fire because it was old, and got a "knock" on it's head. The CF because the CF adapter was crap
I've now discovered that if I burn CDs under Nero7 as "ISO9660:1999" Then the embeddet CDROM filesystem in the cybppc can access the files perfectly.
PROBLEM solved :)
-
Did your Amiga burn up? :-)
-
:whack:
I should smack you for smiling at a burning amiga! :)
History:
Event 0: My original SCSI hd (68pin) which was in this machine burned out a chip. See picture at amibay here (http://amibay.com/viewtopic.php?f=33&t=772)
Event 1: Time passed, I used a CF card and adapter for a long time.
Event 2: I purchase a CF adapter with backplate, it takes to flames when I power it with a floppy power cable.
Event 3: I use a new kind of CF card, no luck
Event 4: I install OS via CD to SCSI disk, with "NoIDE" module on internal IDE header