Amiga.org

Amiga computer related discussion => Amiga Software Issues and Discussion => Topic started by: mingle on November 27, 2008, 05:19:19 AM

Title: AmiTCP 4.0 and A1200 PCMCIA Ethernet network setup - help!
Post by: mingle on November 27, 2008, 05:19:19 AM

Hi,

I'm currently battling with AmiTCP 4 (Demo version) and trying to get it going on my unexpanded A1200...

I'm planning on using it, along with the prism2.device (for wireless) and 3C589.device (for wired Ethernet) to connect to my wireless router, which is itself connected to my cable modem and PC network.

I ran the AmiTCP installer and went through and entered all of the requested info (not sure how much of it is relevant to my required use!). But the list of ethernet interfaces it seems to support didn't include any of my devices/drivers.

Now it's installed, what do I need to do to select the correct device and setting?

I've Google for this info and can't seem to find anything useful...

Has anyone else had any success with AmigTCP 4 and the A1200?

Cheers,

Mike.

Title: Re: AmiTCP 4.0 and A1200 PCMCIA Ethernet network setup - help!
Post by: Daniele on November 27, 2008, 05:44:29 AM

Hi Mike,

give a look to this:

http://www.acc.umu.se/~patrikax/amiga/guides/AmiTCP_Install/

it worked for a friend of mine!
I used EasyNet and works like a charm. But this guide is super! Make sure to find the drivers for your device and go on line!

Cheers

                                Daniele