Amiga.org
Amiga computer related discussion => Amiga Software Issues and Discussion => Topic started by: amigakid on November 08, 2008, 10:14:58 PM
-
Hello i had a few questions. First I picked up a Amiga 3000 with an external SCSI CD-ROM(NEC). The Amiga has 18 megs RAM 68030 CPU and an internal 800 meg SCSI HDD. I put in another 4.3GB Barracuda SCSI drive and upgraded the ROM to 3.1. Currently I was forced to reinstall the OS down to OS2, because I installed OS3.0 and it won't boot to the Workbench, just in a cli window. I can load WB from CLI still though. I copied the sys files from workbench (df0:c/copy df0:#? sys: all clone), but it still boots to CLI. I tried booting from workbench 3.0 disk and 3.0 install, but still only goes to the CLI. I have two questions what driver for the CD-ROM can I D/L, i tried aminet but couldn't fins one. I also have OS 3.5 on CD and want to install it, but cant mount the SCSI CD-ROM. Also am i being a doofus nd missing something about installing os3. When i try to boot from cli to workbench from workbench 3.0(Floppy)it works fine, but when i try to install it gives me the message to insert volume ENV. Any suggestions can be helpful.
-
IdeFIX97 is the way. Don't bother with the name, it works very well with SCSI drives.
-
Thank you, i couldnt remember the bloody name lol of it