Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: AmigaBri on August 13, 2003, 03:16:33 PM

Title: Triton GUI/Make CD not working
Post by: AmigaBri on August 13, 2003, 03:16:33 PM

Hi All

I recently upgraded my A4000 with a Cyberstorm 60 card from eBay. Works beautifully - loadsa memory - very fast, so I thought "Why not get a SCSI CDR drive?"

So I did (a GENERIC CRD-R8000s same as a Smart and Friendly CD Rocket 8020 I believe) - from the nice people at Analogic. They said "Use Make CD" so I did.

Trouble is - whenever I try to start the MakeCD program I get a ramlib 80000004 deadend guru. I think it's related to the Triton GUI used in MakeCD because when I try to open the Triton prefs I get the same result.

I'm using WB 3.9 and DOpus 5.5 (as a WB replacement). I have tried booting up with a vanilla WB 3.0 - still same result. Tried disabling DOpus, MCP, Magic Menu and any other extras I had running and still precisely the same result. As well as the Cyberstorm 60 card I have a CyberGraphics 64/3D card and a dkb scsi Spitfire card. When I boot in 3.0 it bypasses the Cybergraphics card and uses my MicroVitech 17" monitor instead.

Help! I've tried everything (I think). I've tried using FryingPan and Burnit as well, but neither of them support my drive.

Regards
AmigaBri

Title: Re: Triton GUI/Make CD not working
Post by: Framiga on August 13, 2003, 03:35:35 PM

@AmigaBri

probably, you have installed the wrong triton.library.

The right one is ver.6.115 of 54172 byte in size.

ftp://de.aminet.net/pub/aminet/dev/gui/opentriton-usr.lha

Ciao

Title: Re: Triton GUI/Make CD not working
Post by: AmigaBri on August 13, 2003, 04:15:39 PM

No. I have ver.6.115 installed - there don't seem to be any older versions currently available. I contacted the developer of Triton and he recommended trying posting on amiga.org

Regards
AmigaBri

Title: Re: Triton GUI/Make CD not working
Post by: Framiga on August 13, 2003, 04:23:32 PM

Have you checked the size?

Must be 54172 bytes.(libs39 one).

Ciao

PS- try to reinstall Triton archive again BUT before reinstalling it, delete the Env-Archive:Triton dir and reboot.

Title: Re: Triton GUI/Make CD not working
Post by: AmigaBri on August 13, 2003, 04:35:32 PM

My V39 lib has 54672 bytes - did you mean that one or have I got a corrupt version?

Regards

Title: Re: Triton GUI/Make CD not working
Post by: AmigaBri on August 13, 2003, 04:39:24 PM

Hi
Have just installed the correct version (it is the one with 54672 bytes) and everything is working just fine now. Many, many thanks for such a speedy answer and correct diagnosis of my problem

Kind regards
AmigaBri :-D