Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: tabuhuso on May 10, 2008, 03:24:17 PM

Title: scan doubler
Post by: tabuhuso on May 10, 2008, 03:24:17 PM
hi ,can anybody take picture scan doubler external rgb interface solder side ? I have throuble ,jumper wire is broke :(

http://amiga.resource.cx/photos/scanmagicint
Title: Re: scan doubler
Post by: Junior on May 10, 2008, 07:13:54 PM
The link is a internal version ? .
this is the external version

  http://amiga.resource.cx/photos/scanmagicext
Title: Re: scan doubler
Post by: Boot_WB on May 10, 2008, 07:30:39 PM
The "internal" scan magic consists of an internal socketed board which fits over Lisa (obtaining the 24 colour bits), and an external part which plugs into the RGB port (obtaining syncs).

I've got one around somewhere, will try to post a pic later if I can find the power cable for my scanner (my digital camera is crap).

Regards


Rich
Title: Re: scan doubler
Post by: alexh on May 10, 2008, 07:36:59 PM
Quote

Boot_WB wrote:
The "internal" scan magic consists of an external part which plugs into the RGB port (obtaining syncs).

Not all of them have this external part. Some versions have another socketted board which fits over the Alice chip but it does the same thing.

(http://bboah.amiga-resistance.info/display_photos/flickermagic_1_sm.jpg)
Title: Re: scan doubler
Post by: tabuhuso on May 10, 2008, 09:25:10 PM
that is it
http://amiga.resource.cx/photos/scanmagicint,ScanMagicInt-conn

I need solder side picture for broken cable jumper :(
Title: Re: scan doubler
Post by: Boot_WB on May 11, 2008, 08:10:53 PM
Matey,

Unfortunately I cannot find the power cable for my scanner. I must have thrown it out during my recent clearout.

If you want to post a pic of the broken trace on yours, I'll compare it and advise which pin it should be connected to. Best I can do I'm afraid.

(Arse, my scanner is now useless with no 15V adapter for it. Must be more careful when having a clear out next time.)