Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: Roger_S on May 08, 2008, 06:12:26 PM
-
Hi all,
My a1200 is equipped with a blizzard 1230IV and a scsi controller. There is a zipdrive, dvd drive and 18Gb hd connected to it. All seems to work fine.
I managed to install AOS3.9 on an 5GB partation that is bootable, tried prio 0 and 1. Installation works fine, but when booting the amiga stops with a guru and gets in a loop where it keeps trying to boot from the hd? I guess.
Is selected the partion as a bootable device from the ESC, but that gave the same result.
Do I need to install additional software from the blizzard card?
edit:
mmm maybe this isn't the right place to post this message, maybe it belongs in an SW topic
-
Unless you use a third-party file system like PFS3 or SFS, the boot partition must be completely inside the first 4GB of the HDD. So your 5GB partition is definitely too large.
Bye,
Thomas
-
pfff... that was it, thank you