Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: krakonos on May 01, 2008, 04:19:10 AM

Title: A2000 Harms Professional 3000 help
Post by: krakonos on May 01, 2008, 04:19:10 AM

hi guys,
does anyone have a "Harms Professional 3000" card (or manual)
for a2k please? the card has 8 (16?) mb ram, but it only shows
4mb in wb and i don't know how to configure those jumpers on the card.

thanks

Title: Re: A2000 Harms Professional 3000 help
Post by: weirdami on May 01, 2008, 05:29:10 AM

If all else fails, do random jumper experiments. :-)

Or, maybe, some of the super geekosmartypants people on here can get you in the know if you posted a picture of the jumpers or something. Then again, someone might just have the manual. :-)

Title: Re: A2000 Harms Professional 3000 help
Post by: krakonos on May 01, 2008, 01:05:34 PM

thanks weirdami, i have set up jumpers exactly like on the photo (http://amiga.resource.cx/photos/professional3000,Professional3500-2)
except JP2, coz when is it in the position like on the picture
miggy doesn't boot.
no luck with "random jumper experiments" neither :-) (or :-()

Title: Re: A2000 Harms Professional 3000 help
Post by: rkauer on May 02, 2008, 03:11:56 AM

 Did you read the description of your card?

Quote

only 4 or 8 MB is autoconfigured from the total 8 or 16 MB

 You need to run the install disk utility to get the remaining RAM (must be some like "addRAM" or some like it)...